I have a 96 integra, with a GSR interior. I have stock speakers all around right now, but am wanting to upgrade to 6X9's in the back. Has anyone done this, and can most places do it for relatively cheap? Thanks.

 

its jus some simple bolts and two wires, shouldnt be too hard i think.

 

I do it at a good price here in NY, if you are in NY you are welcome to come down.

 

Just saw cut-outs in the deck lid in back. I did it to my car. Trace the speaker with a crayon or something (do not cut around areas where the speaker screws go and make sure you start cutting small, then trim to fit), drill a couple holes to make room for the jigsaw, and saw away. Just make sure you dont make them too close to the front since there is a metal bar. I'm sure many people have done this, let me know if you have any more questions.

 

are you sure you want to upgrade? i would rather have 6.5" than my current 6x9s. what is your reasoning for upgrading?

 

Come to think of it, when i had the 6 x 9's in the back, they did overpower the 6.5's up front. Good call Will.