Notices

how many quarts of oil to use? (reply fast puhlease!!)

Thread Tools
 
Old 01-07-2005, 12:41 AM
  #11  
Skad
Worst Poster Eva
Thread Starter
 
Skad's Avatar
 
Join Date: Jul 2003
Location: Albuquerque
Posts: 487
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by chimchim
The manual says 3.5 qts, and that puts it at the higher hole on the dipstick. Do NOT put more than this.

The reason why you don't put more than you need is because the oil level will be so high in the oil pan that the crankshaft (which is just above the oil pan and spinning at a very high rate) will froth up the oil. Frothy oil is very hard for your oil pump to circulate if at all and you'll LOSE lubricatioin due to this.

So if you put too much, pull the drain plug to drain some out to the right level.
damnit!!

*sigh* i guess i'll have to get back under the car tomorrow morning and drain some of it

damnit!!

How long will it take to "ruin" something if I have 4 quarts instead of 3.5? cuz I'll probably have to drive to my cousins to do it (apartment complex throws a shiat fit)

plus I drove around all day as well..

this sucks

Thanks for the info though ur meh hero
Old 01-07-2005, 12:52 AM
  #12  
asiandoood
sancho on the sizzide!
 
asiandoood's Avatar
 
Join Date: Aug 2000
Posts: 27,129
Likes: 0
Received 0 Likes on 0 Posts
Default

should be 3.5 for the 1.6 and 4.5 for the 1.8
__________________
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
Old 01-07-2005, 01:09 PM
  #13  
Andy
Hybrid Forum Moderator
 
Andy's Avatar
 
Join Date: Mar 2000
Location: Southwestern PA
Posts: 2,363
Likes: 0
Received 0 Likes on 0 Posts
Default

I could have sworn the damn owners manual says 3.8 quarts for a D16Y8, that's what I always put in, 110k miles later, it still runs and doesn't leak.
__________________
Andy - Reinstated Hybrid Forum Moderator

'06 Subaru Legacy Spec B - Stock, for now
'98 Civic EX - CTR headlights and grill, Kosei K1's, for sale
'90 240SX - SR20DET that will never get installed, project car.
Old 01-07-2005, 01:48 PM
  #14  
chimchim
WRX cuz Honda won't wagon
 
chimchim's Avatar
 
Join Date: Oct 2003
Location: San Jose, CA
Posts: 1,725
Likes: 0
Received 0 Likes on 0 Posts
Default

I'm sure .3 qts difference isn't a big deal. But putting 4.5 is definitely too much.
Old 01-07-2005, 01:51 PM
  #15  
chimchim
WRX cuz Honda won't wagon
 
chimchim's Avatar
 
Join Date: Oct 2003
Location: San Jose, CA
Posts: 1,725
Likes: 0
Received 0 Likes on 0 Posts
Default

BTW, if you've done a swap (like a B18), use an aftermarket oil pan, added a turbo/supercharger (which taps the oil system), and or any other thing like this, etc, your oil requirements are probably different. (And beyond the scope of this discussion.)
Old 01-07-2005, 04:51 PM
  #16  
NeverBX
Snootchie Bootchies!!
 
NeverBX's Avatar
 
Join Date: Dec 2002
Location: Hawaii
Posts: 2,013
Likes: 0
Received 0 Likes on 0 Posts
Default

fast puhlease!!
Old 01-07-2005, 04:56 PM
  #17  
NeverBX
Snootchie Bootchies!!
 
NeverBX's Avatar
 
Join Date: Dec 2002
Location: Hawaii
Posts: 2,013
Likes: 0
Received 0 Likes on 0 Posts
Default

i have a y8 and put 4 and have had no problems for 9 years now.
Old 01-07-2005, 06:14 PM
  #18  
Skad
Worst Poster Eva
Thread Starter
 
Skad's Avatar
 
Join Date: Jul 2003
Location: Albuquerque
Posts: 487
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by NeverBX
i have a y8 and put 4 and have had no problems for 9 years now.
I still have 4 in mine, but I'm going to check it tomorrow morning while it's been sitting all night.

I drove everywhere all day yesterday and didn't check the level of it (my bad) but I think having four quarts is fine, I reallly think that's what I had in there last time.

I'm really thinking I might just stop by a Honda dealership and ask, or maybe call and ask.

But i'm thinking 4 quarts is now biggie, just I don't want my oil to "froth" up and kill stuff..
Old 01-09-2005, 04:35 PM
  #19  
chimchim
WRX cuz Honda won't wagon
 
chimchim's Avatar
 
Join Date: Oct 2003
Location: San Jose, CA
Posts: 1,725
Likes: 0
Received 0 Likes on 0 Posts
Default

I'm sure 4 qts is fine. But people are idiots if they think by my saying "more than what the manual specifies" to equivicate "immediate frothy death". The deal is that the more oil you put in, the higher the level and the greater the chance it sloshes up to the crankshaft (because you're car does jiggle around). Something extreme like 8 qts (pulling a number outta the air) will definitely be a problem. So, between 3.5 (as the manual states) and 8-ish is a grey area of risk, just varying severity of risk. Nothing is perfect, not even the recommended 3.5 qts since you could find some extreme (but rare) case that would cause that to have problems.
Old 01-10-2005, 01:10 PM
  #20  
doughboy_88
Registered User
 
doughboy_88's Avatar
 
Join Date: Dec 2004
Location: SF Bay Area, CA
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
Default

why not just put in 3.5 and then use the dip stick to gauge how much more oil you need, if any?



All times are GMT -8. The time now is 01:56 AM.