Woo Woo! My Rollbar arrived today...
Thread Starter
I'm RICK JAMES, bitch!
Joined: Mar 2002
Posts: 4,742
Likes: 0
From: Baltimore, Md
Originally posted by MrFatBooty
Like I said, get some rollbar padding unless you plan on wearing a helmet all the time. It won't be very fun to smack your head on a non-padded rollbar. Ya ya, the padding's not as sexy as the plain bar but for a road car it's a necessity.
Like I said, get some rollbar padding unless you plan on wearing a helmet all the time. It won't be very fun to smack your head on a non-padded rollbar. Ya ya, the padding's not as sexy as the plain bar but for a road car it's a necessity.
Banned
Joined: Mar 2002
Posts: 8,220
Likes: 0
Originally posted by FourthGenHatch
No no, you just drill holes through the car. The bar has like plates on the ends of its feet, you line it all up and drill holes to match up to that. Go on the other side of where you drilled and place this thick metal plate on it with the bolts going into it, go inside the car to put the nuts on the bolt and tighten it. There is no welding or cutting needed.
No no, you just drill holes through the car. The bar has like plates on the ends of its feet, you line it all up and drill holes to match up to that. Go on the other side of where you drilled and place this thick metal plate on it with the bolts going into it, go inside the car to put the nuts on the bolt and tighten it. There is no welding or cutting needed.
h:
Thread Starter
I'm RICK JAMES, bitch!
Joined: Mar 2002
Posts: 4,742
Likes: 0
From: Baltimore, Md
Here it is installed. As you can see it bolts from the floor to the wheel well, with both my seats installed there is like a 3'' space between the bolsters on them so its not like you could get your head through there and hurt yourself...
Here is the mount inside of the car on the wheel well...
Here is that same mount on the other side of the well outside the car...
Heres how you get it inside the car, take out one of the seats and shimmey it in, it's a tight fit but not hard to get in...
Same idea but view from the back...
Here is the mount inside of the car on the wheel well...
Here is that same mount on the other side of the well outside the car...
Heres how you get it inside the car, take out one of the seats and shimmey it in, it's a tight fit but not hard to get in...
Same idea but view from the back...
sancho on the sizzide!
Joined: Aug 2000
Posts: 27,129
Likes: 0
i've always thought the effective rollbars were welded in.
__________________
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
