92eg6

my b20 is leaking, IT IS NOT THE HEAD GASKET! does anyone know where it may be leaking from
?

ISP James

oil feed line into the head :dunno: you should probably be more specific... where is it coming from? the back, front, side? how high is it....

92eg6

coming from the passenger side, looks like its coming from the head gasket, i bought a special head gasket had it re sealed 3 times, have arp head studs re tourqed them 3 times, had a machine shop check the head and block levels and they said it looks fine

Kai

How was the VTEC oil feed passage sealed? Plugged? Welded? It was plugged, right?

Are you sure the valve cover gasket and cam seals are good?

Step one is always to completely clean the area and wait to see where oil starts coming out again.

ISP James

cam plug seal would be the first thing i would check...

mccoy1178

if u got a vtec head, try the vtec solenoid. common problem with my gsr. good luck
Mccoy

Kai

McCoy: This thread is almost two years old. Please don't dig up dead threads as the problem was probably fixed long ago.