MrRealityman

i got my ecu and the chips, socket, and other doodads that came with it. i just dont know where to install the parts on the board. i was going to have sombody do it for me. but for $60 bucks ill just do it myself. pictures would be great.

SP00NFed

i wouldn't do it yourself if your not expierenced, my friend ruined an ecu i had trying to chip it

MrRealityman

i know what im doing. i just need to know where to put the parts. as a mater of fact im going to get a new soldering iron to replace my crappy school issue iron.

tsirhclig

have you already done this? if not pm me i'll give you the instruction on how to

dvpatel

May I ask the respected mods of this forum why my request for a Step By Step to install the inline Tranny Filter was deleted but this wasn't?

sloshy

try this it worked for me i chipped my ecu and a couples of my buddies ecus, with this i was kinda nervous but at first but everything went well... is not hard at all.. i've even converted non-vtec ecu to vtec and auto to manual...

scroll to the bottom it shows the parts and where they go, i suggest buying the chipping kit from moates.net too..

http://www.moates.net/zips/crome/Tun...ME%20v1.06.pdf

thegoodman

need to chip my ecu but one of the chips dont fit

Eni6mA18

--------------------------------------------------------------------------------

hey i just read the DIY 6th gen headlights thingy...its pretty amazing..i guess that is the only way of taking the amber out of the lights? i might as well paint int black while i'm at it...
also will those plastic covers go back on easily once taking off via oven??