was that wire connected and you cut it??

 

it was not connected. its just there, and the label says its for the warn function, and i want that,

 

hmm...maybe the warn function is like the 2 way thing, and you/'d need a transmitter for that... come with one? buy one seperate?

 

i thought it was for if the card is touched, the alarm warns the person before going off with full blast siren

 

that is in the same circuit as the alarm horn....its 2 levels of siren basically.

 

ok yea, cause the warn just turns the siren on for a few sec rather than the alarm wire that turns the siren on all the time, so i tap the warning wire into the alarm where should i put it?

 

no, that should be already taken care of. I'd suggest wiring the rest of the car, and attach the 2 green wires to each other, (completing the circuit) and test it. That spot is a place to put an early warning device such as a cell phone caller or something like that i believe.

 

ok so the green wire is extra, not having it hooked up wont make the siren warn function not work, ok i get it. thanks for all the help. i am going to try and install the 6 wires of the main harness @6pm est

 

good luck...like i said, just twist the gree n wires together for now

 

i cant with that cause at the plug there is a small green wire that loops from the green's port to the blue port. i would have to tap that green wire into something if anything