TL Sway Bar installed.
oh how i wish i had a V6
Joined: Aug 2005
Posts: 151
Likes: 0
From: Los Angeles
oh and one more thing, is backing up the car onto 6 inch tall ramps ok as far as installing goes? or do i need to jack it up, put jack stands, take off the wheels, and then work on it? also TinTin's question was never answered about the torque wrench. i dont want to buy a torque wrench so should i just tighted it not too tight but not too loose.
Thread Starter
7th Gen Coupe V6
Joined: Jun 2005
Posts: 928
Likes: 1
From: The Sin City
Originally Posted by 04accordcoupe
after reading this thread, shonnv, you motivated me to call acura and order one. i just got off the phone with acura and just placed my order. thanx for postin the part numbers. cant wait to get it. i do have to add though that they gave me a quote of 39.99$ for the sway bar. and a pair of bushings were like a little over a dollar, and a pair of holders were also a little over a dollar. so i guess its cheaper in southern california than where ever it is you live. i do have one question though. is a pair of bushings and a pair of holders all i need? or do i need more than one pair?
Thats realy a good price for sway bar.
The tools you need are
1> Pair of Plier (locking pliers are the best)
2> Ratchet set ( I bought one with 40pcs from Autozone for like $6)
3> Set of Allen Wrench($2 at Walmart)
4> WD40
5> Silicone Lubricant
Spray some WD40 on the endlinks under your car, it will make it easier to
unbolt the links and on the new Rubber Bushings put some silicone lubricant.
Post some pictures when you are done or if you need help, drop me an email at shon.nv@gmail.com
Thread Starter
7th Gen Coupe V6
Joined: Jun 2005
Posts: 928
Likes: 1
From: The Sin City
Originally Posted by 04accordcoupe
oh and one more thing, is backing up the car onto 6 inch tall ramps ok as far as installing goes? or do i need to jack it up, put jack stands, take off the wheels, and then work on it? also TinTin's question was never answered about the torque wrench. i dont want to buy a torque wrench so should i just tighted it not too tight but not too loose.
You dont need a Torque wrench IMO, just tighten the Bolts pretty good and you should be ok. About parking and removing your tires, if you can get under the car and easily work on it then you dont need to lift it up but if you cannot, then do whatever is easier for you. I didnt lift my car up with anything since Iam very skinny and my car is not lowered.
Thread Starter
7th Gen Coupe V6
Joined: Jun 2005
Posts: 928
Likes: 1
From: The Sin City
Originally Posted by accordsir86
how did u do the vector drawing on your cardomain site. i wanna do it to my car after i saw someelse do it with another car. how do you do it, photoshop or something.
Senior Member
Joined: May 2002
Posts: 3,049
Likes: 0
From: OH
Originally Posted by shonnv
I never said its mine. I just thought since there is one posted already, i should post the link of it instead of writing it again.
here is another link to Neuspeed which is the same concept
http://www.neuspeed.com/data/installs/25.20.19.4.pdf
here is another link to Neuspeed which is the same concept
http://www.neuspeed.com/data/installs/25.20.19.4.pdf
Registered Honda user
Joined: Dec 2003
Posts: 675
Likes: 0
From: Texas
Thread Starter
7th Gen Coupe V6
Joined: Jun 2005
Posts: 928
Likes: 1
From: The Sin City
Originally Posted by mrksts
