They can be either stickers or emblems, it all depends on the year and model of your car. But the above two recommendations are right, and if you are careful, you wont scratch your car.

 

to honda civic turbo.

 

Does anyone know how to get condensation out of headlights? Also how to keep it out. I believe you can silicone them at the seams but i'm not sure.

 

You can take them off and let them air out. Or, just take the bulb(s) out and let the condensation evaporate that way. Once all the moisture is gone, run an even bead of silicone sealant around the mating surfaces.

 

will a 96 dx hb catback fit a 5th gen Si perfectly?!?!?!!?!?!?

 

No, it will not. The midpipe will be too long since the 6th gen hb has the cat hanging right off the head. It'll bolt up if you don't run a cat, but if you want to keep your cat, you'll need to cut the piping. Or, just get a 5th gen hb exhaust.

 

what do you mean the cat is right off the head?

 

 

thats not all 6th gens is it?

 

All 6th gen hatches, yes. It also applies to all 6th gen CX/DX/LX.