Audio question for my friend.
Originally Posted by nhatters
I just noticed you're in Oakland, California, do you know of any good stereo shops in the Bay Area? I'm inbetween Oakland and San Jose, really close to Hayward.
Oh and, for those four speakers and HU, and the Alpine amp, how over powered am I?
Oh and, for those four speakers and HU, and the Alpine amp, how over powered am I?
Steroshops in the Bay Area to do what?
__________________
.
.
To do everything. Installation of everything. And a place that has warentees, and won't likely to go out of buisness anytime soon incase something breaks.
Edit: And how badly am I under powered? Also, what would be a good amp for the single type-r sub? Would this be good?
http://iweb.alpine-usa.com/pls/admn/...=140&p_main=10
But it's mono, so would that be bad?
Another edit: If I got these speakers:
http://iweb.alpine-usa.com/pls/admn/...=104&p_main=10
Without and amp, how badly under powered? And with the amp, dangeriously over powered?
Edit: And how badly am I under powered? Also, what would be a good amp for the single type-r sub? Would this be good?
http://iweb.alpine-usa.com/pls/admn/...=140&p_main=10
But it's mono, so would that be bad?
Another edit: If I got these speakers:
http://iweb.alpine-usa.com/pls/admn/...=104&p_main=10
Without and amp, how badly under powered? And with the amp, dangeriously over powered?
Last edited by nhatters; Dec 25, 2005 at 12:13 AM.
Audiomobile
307 11TH St
Oakland, CA 94607-4215
(510) 839-1992
They mostly handle higher end stuff.
Here, if you want to know whether something will be a good match...look at the amp's RMS wattage rating...and the speaker's RMS wattage rating. Those numbers should be similar.
307 11TH St
Oakland, CA 94607-4215
(510) 839-1992
They mostly handle higher end stuff.
Here, if you want to know whether something will be a good match...look at the amp's RMS wattage rating...and the speaker's RMS wattage rating. Those numbers should be similar.
__________________
.
.
Dealt with them before, or only heard good things?
And if the RMS from the HU and the RMS from the speakers don't match up, find an amp and add the RMS to that plus the HU's RMS and see if that together reaches around the speakers/sub depending on the situation?
It's just, the HU is 18 and the amp is about 14, but I think the speakers required 50, so aren't I really kind under powered? All assuming What I just said was right.
And thanks again!
And if the RMS from the HU and the RMS from the speakers don't match up, find an amp and add the RMS to that plus the HU's RMS and see if that together reaches around the speakers/sub depending on the situation?
It's just, the HU is 18 and the amp is about 14, but I think the speakers required 50, so aren't I really kind under powered? All assuming What I just said was right.
And thanks again!
One last question...
http://iweb.alpine-usa.com/pls/admn/...=104&p_main=10
If I got the same HU, and the same Alpine amp, would that be too over powered, or just right? And which would you reccomend? Because most likely I'll just get another amp and sub later, and just live with the HU, speakers, and single amp for a while. HU + amp + Type-R or Type-S?
http://iweb.alpine-usa.com/pls/admn/...=104&p_main=10
If I got the same HU, and the same Alpine amp, would that be too over powered, or just right? And which would you reccomend? Because most likely I'll just get another amp and sub later, and just live with the HU, speakers, and single amp for a while. HU + amp + Type-R or Type-S?
Originally Posted by nhatters
Dealt with them before, or only heard good things?
And if the RMS from the HU and the RMS from the speakers don't match up, find an amp and add the RMS to that plus the HU's RMS and see if that together reaches around the speakers/sub depending on the situation?
It's just, the HU is 18 and the amp is about 14, but I think the speakers required 50, so aren't I really kind under powered? All assuming What I just said was right.
And thanks again!
And if the RMS from the HU and the RMS from the speakers don't match up, find an amp and add the RMS to that plus the HU's RMS and see if that together reaches around the speakers/sub depending on the situation?
It's just, the HU is 18 and the amp is about 14, but I think the speakers required 50, so aren't I really kind under powered? All assuming What I just said was right.
And thanks again!
The amp is 14? What amp offers 14 watts?
__________________
.
.
Sorry I got it mixed up between the RMS stuff.
So, if I got this...
http://iweb.alpine-usa.com/pls/admn/...=104&p_main=10
and...
http://iweb.alpine-usa.com/pls/admn/...=120&p_main=10
That would be the perfect match because the amp does 40x4 and those speakers are 40RMS?
But then this HU...
http://iweb.alpine-usa.com/pls/admn/...y=45&p_main=10
Does 50x4, so I wouldn't need the amp if I got the Type-S speakers?
And if I got the sub would a mono amp be okay?
Like this one?
http://iweb.alpine-usa.com/pls/admn/...=140&p_main=10
For this sub:
http://iweb.alpine-usa.com/pls/admn/...=150&p_main=10
Or would I need a stronger amp and or stereo one instead of mono?
Thanks again man!
So, if I got this...
http://iweb.alpine-usa.com/pls/admn/...=104&p_main=10
and...
http://iweb.alpine-usa.com/pls/admn/...=120&p_main=10
That would be the perfect match because the amp does 40x4 and those speakers are 40RMS?
But then this HU...
http://iweb.alpine-usa.com/pls/admn/...y=45&p_main=10
Does 50x4, so I wouldn't need the amp if I got the Type-S speakers?
And if I got the sub would a mono amp be okay?
Like this one?
http://iweb.alpine-usa.com/pls/admn/...=140&p_main=10
For this sub:
http://iweb.alpine-usa.com/pls/admn/...=150&p_main=10
Or would I need a stronger amp and or stereo one instead of mono?
Thanks again man!
Originally Posted by nhatters
Sorry I got it mixed up between the RMS stuff.
So, if I got this...
http://iweb.alpine-usa.com/pls/admn/...=104&p_main=10
and...
http://iweb.alpine-usa.com/pls/admn/...=120&p_main=10
That would be the perfect match because the amp does 40x4 and those speakers are 40RMS?
So, if I got this...
http://iweb.alpine-usa.com/pls/admn/...=104&p_main=10
and...
http://iweb.alpine-usa.com/pls/admn/...=120&p_main=10
That would be the perfect match because the amp does 40x4 and those speakers are 40RMS?
Originally Posted by nhatters
But then this HU...
http://iweb.alpine-usa.com/pls/admn/...y=45&p_main=10
Does 50x4, so I wouldn't need the amp if I got the Type-S speakers?
Originally Posted by nhatters
And if I got the sub would a mono amp be okay?
Like this one?
http://iweb.alpine-usa.com/pls/admn/...=140&p_main=10
For this sub:
http://iweb.alpine-usa.com/pls/admn/...=150&p_main=10
Or would I need a stronger amp and or stereo one instead of mono?
Thanks again man!
Like this one?
http://iweb.alpine-usa.com/pls/admn/...=140&p_main=10
For this sub:
http://iweb.alpine-usa.com/pls/admn/...=150&p_main=10
Or would I need a stronger amp and or stereo one instead of mono?
Thanks again man!
__________________
.
.


