Hard drive jumper settings?
Thread Starter
un-Touch'd krew
Joined: May 2001
Posts: 51,774
Likes: 1
From: My own level of hell
Hard drive jumper settings?
Its been a while since I have added any hard drives or swapped any around so I need to know what the master pin setting is on a Maxtor drive.....can't seem to find the paperwork around anywhere.
__________________
"I'll keep my money, guns and freedom. You can keep the "Change."
"I'll keep my money, guns and freedom. You can keep the "Change."
Joined: Oct 2000
Posts: 44,908
Likes: 0
From: Location Location
should be jumper 50 should be master. that is the one closest to the ide connector
__________________
'00 Dakar Bus CRS Edition
LCD Squad #0001
'00 Dakar Bus CRS Edition
LCD Squad #0001
Originally Posted by WiLL
...I really wanna get out and shoot people.
Joined: Oct 2000
Posts: 44,908
Likes: 0
From: Location Location
:::::::::::::::::::---:::.:---oooo
The first 40 = ide signal pins the next 3 should be the master/slave/cable select, the next two are not used and the last 4 are the cable
you want a jumper on the bolded pins
The first 40 = ide signal pins the next 3 should be the master/slave/cable select, the next two are not used and the last 4 are the cable
you want a jumper on the bolded pins
__________________
'00 Dakar Bus CRS Edition
LCD Squad #0001
'00 Dakar Bus CRS Edition
LCD Squad #0001
Originally Posted by WiLL
...I really wanna get out and shoot people.
Thread Starter
un-Touch'd krew
Joined: May 2001
Posts: 51,774
Likes: 1
From: My own level of hell
Thanks Rick.
I checked the drive out and wouldn't have asked if it was simply labeled on the top of the drive
I checked the drive out and wouldn't have asked if it was simply labeled on the top of the drive
__________________
"I'll keep my money, guns and freedom. You can keep the "Change."
"I'll keep my money, guns and freedom. You can keep the "Change."
Joined: Oct 2000
Posts: 44,908
Likes: 0
From: Location Location
Originally Posted by Nightshade
Thanks Rick.
I checked the drive out and wouldn't have asked if it was simply labeled on the top of the drive
I checked the drive out and wouldn't have asked if it was simply labeled on the top of the drive
no problem
also with maxtor drives if you flip the drive over and look at the silk screening on the board they usually have it labeled
ms for master, sl for slave, etc
__________________
'00 Dakar Bus CRS Edition
LCD Squad #0001
'00 Dakar Bus CRS Edition
LCD Squad #0001
Originally Posted by WiLL
...I really wanna get out and shoot people.
Thread Starter
un-Touch'd krew
Joined: May 2001
Posts: 51,774
Likes: 1
From: My own level of hell
Originally Posted by DakarM
no problem
also with maxtor drives if you flip the drive over and look at the silk screening on the board they usually have it labeled
ms for master, sl for slave, etc
also with maxtor drives if you flip the drive over and look at the silk screening on the board they usually have it labeled
ms for master, sl for slave, etc
__________________
"I'll keep my money, guns and freedom. You can keep the "Change."
"I'll keep my money, guns and freedom. You can keep the "Change."
Thread
Thread Starter
Forum
Replies
Last Post
Greddy Guy
Parts Classifieds
1
Oct 9, 2002 07:40 PM