szm426

did any one do any engine build-up where it can rev to like 8500-9000 and stand 20-25 psi? And where can i find a good turbo kit and engine internals including cams,pistons,heads the whole deal. Thanks

THATPRELUDEGUY

The H22 is not the motor to run past the rev limiter from all I've read. No real power gains are going to be made and you have a good chance at cracking a cylinder or throwing a rod. As for turbo's running 20-25psi that's a custom deal with a ton of motor work involved, better get a good tuner to do that unless you want to replace short blocks once a week.

dptkfil

The engine build-up will cost something near 9000 .. You can rev up to 10,000 rpm but I dont' suggest you do that maybe 9300... Just look at my setup ... You will need low compression pistons(mine is high because I want my car to be able to on street), rods, P&P, Crank, the complete head--valves, valves spring, retainers, cam and P&P..I will recommand to blue print your engine if you have the money.....My setup can stand 28 psi that boost by a T60...

SGImport

when do you hit full boost and what do you rev to?

dptkfil

My car is still in the process of the a new paint job then it will ship to my friend's shop to complete the turbo setup... At this point, I really can't tell you.. but my buddy told me that I should see full boost like at 4500...and I can rev to 95k....