maybe you are having piston ring blow by? Did you crank up the boost after tuning for a specified boost level? Is it running on all four cylinders? What about your clutch/pressure plate, maybe they are slipping due to over loading? That would cause you to not put any power to the ground. Also, plug your laptop into your hondata and check you ignition maps and fuel maps. I know with K-pro for the RSX-S you can do such things...just trying to help.

 

I have a stage 3 clutch in my car. It dosent feel like its sleeping and there is no smell of a burnt clutch. I thank you for your imput. I just lost my dizzy so I am hoping that it was not putting out enough spark to egnite all that fuel. I do have the msd but being that the dizzy was bad I dont know. Hope that was the problem. I also found that one of my vacume lines for the iab box was not conected. That may be causing one big boost leak as well. Hope to get it done soon

 

Glad to see you found a potential problem, keep us posted. Sounds like you got it.

 

i hope thats the problem......

good luck

 

update on the compression test looking at the motor for dizzy to cams 175 185 175 175. I am gonna install another dizzy today. Will keep you all posted and thanks again

 

new dizzy still have issue with code 4