1st -> 2nd grind...
#11
Senior Member
Join Date: Jun 2002
Location: Holyoke, MA
Posts: 14,544
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Kaiz
I think it might be cause the clutch isn't disengauging all the way. I'm not sure how to fix this besides gettin a new clutch/pressure plate?
I think it might be cause the clutch isn't disengauging all the way. I'm not sure how to fix this besides gettin a new clutch/pressure plate?
:werd: get the leak fixed and adjust your peddle a little bit, that will put some more pressure on it. my clutch jut got replaced and i had 81k on it. oh if you do master cylinder do slave also at the same time.
i have heard, don't know if its true, that integra's have a weak 1st and 2nd??? don't know anything about that,
#12
Member
Thread Starter
Join Date: Jun 2002
Location: Lafayette, CO
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Try replacing and properly bleeding the clutch fluid... I replaced the clutch master cylinder and the problem didn't go away, but I don't remember having a problem once I eventually bled it *properly*. I think having a short shifter at the time amplified the problem, but wasn't the cause of it.
It still does it now, but *only* if I'm lazy on the clutch (ie don't press it far enough or fast enough; totally my fault).
It still does it now, but *only* if I'm lazy on the clutch (ie don't press it far enough or fast enough; totally my fault).
#13
Originally posted by Weston
It still does it now, but *only* if I'm lazy on the clutch (ie don't press it far enough or fast enough; totally my fault).
It still does it now, but *only* if I'm lazy on the clutch (ie don't press it far enough or fast enough; totally my fault).
#14
Senior Member
Join Date: Jun 2002
Location: Holyoke, MA
Posts: 14,544
Likes: 0
Received 0 Likes
on
0 Posts
i dont want to sound like a bastard, try to find someone at acura who knows what they're talking about. i once dealt with a guy who didn't know what a short shifter was :rofl: and ask them whats up with the trannies in tegs, then come back and report to us.
#17
Senior Member
Join Date: Jun 2002
Location: Holyoke, MA
Posts: 14,544
Likes: 0
Received 0 Likes
on
0 Posts
yeah it has notched when its cold cause the liquid isn't flowing that well since its cold. when it warms up it sticks better and goes away. let your car warm up for five minutes or so. i get the same thing, i let my car warm up for 5 minutes and it goes away.
Thread
Thread Starter
Forum
Replies
Last Post
NOSon
Integra & 97-01 Integra Type-R
10
12-08-2003 11:23 PM