Notices

No Heat Please Help

Thread Tools
 
Old 12-02-2002, 06:18 PM
  #1  
LEGENDCanadian
Junior Member
Thread Starter
 
LEGENDCanadian's Avatar
 
Join Date: Dec 2002
Location: Los angeles, occasionally toronto
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default No Heat Please Help

ok here is what happend. had a hole in the rad it overheated so towed it home replaced the rad. now doesnt over heat but i have no heat in the car. could the water i tried to put in have froze during the night in the heater core? i dono what to do i need heat! any ideas? its a 90 ls coupe manual tranny.
Old 12-03-2002, 06:37 AM
  #2  
XSrcing
Senior Member
 
XSrcing's Avatar
 
Join Date: Sep 2000
Location: Dallas
Posts: 2,561
Likes: 0
Received 0 Likes on 0 Posts
Default

you could have a big air bubble in the cooling system. with the engine running, shake, wiggle and bump the radiator. this will help air bubbles move to the top so they can be vented, and just add more water/antifreeze as needed. but that isnt a for sure answer.
Old 12-03-2002, 06:41 AM
  #3  
LEGENDCanadian
Junior Member
Thread Starter
 
LEGENDCanadian's Avatar
 
Join Date: Dec 2002
Location: Los angeles, occasionally toronto
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

ill try that i worked out most the bubbles last night but ill try it again. thanks
Old 12-03-2002, 12:16 PM
  #4  
Mech05
Junior Member
 
Mech05's Avatar
 
Join Date: Jul 2002
Location: Canada
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default

I am a mechanic in canada and understand the need for heat. I have wrote what you have to do at least 4 times but I can't post it for some reason so if you want my help email me at mech05@NOSPAMhotmail.com
Old 12-04-2002, 09:33 AM
  #5  
LEGENDCanadian
Junior Member
Thread Starter
 
LEGENDCanadian's Avatar
 
Join Date: Dec 2002
Location: Los angeles, occasionally toronto
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

ok i finally bit the bullet and got it to work. i took the hoses from the heater core out and blew compressed air through em. there was quite a bit of white scaling that came out at me acutally but now the heat works great. thanks for all the help. it was clogged thats all




All times are GMT -8. The time now is 07:41 AM.