Tires are some basic Dunlop Direzza street tires, 205/50/15. 45psi and all, I didn't lower the air pressure or anything, just went to the track and lined up. The 60 foot of the 15.02 run was a 2.265. If the pipes continue to be a problem I'll certainly look into those clamps. You can see from the engine shop up top that the pipe going into the throttle body is clamped before the bead roll, just completely slipped my mind to fix it before the track.

Complete slip of the 13.2 and 12.8 run:
R/T: .479
60': 2.442
330: 6.078
1/8: 8.899
MPH: 88.54
1000: 11.284
1/4: 13.227
MPH: 116.76


R/T: .266
60': 2.198
330: 5.652
1/8: 8.418
MPH: 86.75
1000: 10.821
1/4: 12.833
MPH: 112.00

 

A set of slicks and a good 60' and that is an 11 sec pass.

 

yep, just get some traction