97 LS Headlight enclosure
12-23-2007, 11:42 AM
#1
Junior Member
Thread Starter
Join Date: Dec 2007
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
97 LS Headlight enclosure
How do I remove the headlight enclosure (2 headlights per side) on my 97 LS? I have had water leaking into it and need to check for cracks and repair.
tks
tks
12-23-2007, 04:48 PM
#2
got boost?
Join Date: Jan 2005
Location: somewhere
Posts: 2,346
Likes: 0
Received 0 Likes
on
0 Posts
take off your bumper, look in teh FAQ should be info in here. then remove your headlights, take off all the soft rubber things off the headlight and u have to bake them and seperate them... use the SEARCH fuction and the FAQ's and you will find a lot of usefull information on to this what i gave u is the general of how to do it.
12-27-2007, 11:48 AM
#3
Senior Member
Join Date: Oct 2004
Location: Texas
Posts: 4,267
Likes: 0
Received 0 Likes
on
0 Posts
Just to add, there is only one enclosure per side. The bumper must be removed to gain access to the headlights. As 1turbodc2 mentioned, you put the headlights in your oven for 5-8 minutes at 350 to soften the glue, you can reseal with silicone.