97 LS Headlight enclosure
 

How do I remove the headlight enclosure (2 headlights per side) on my 97 LS? I have had water leaking into it and need to check for cracks and repair.

tks

take off your bumper, look in teh FAQ should be info in here. then remove your headlights, take off all the soft rubber things off the headlight and u have to bake them and seperate them... use the SEARCH fuction and the FAQ's and you will find a lot of usefull information on to this what i gave u is the general of how to do it.

Just to add, there is only one enclosure per side. The bumper must be removed to gain access to the headlights. As 1turbodc2 mentioned, you put the headlights in your oven for 5-8 minutes at 350 to soften the glue, you can reseal with silicone.