I finally did something with my lame PCV system
Thread Starter
On permanent hiatus
Joined: Jul 2004
Posts: 9,716
Likes: 0
From: A forum with actual tech
Well I gutted my PCV valve and ran the hose to my catch can. I then custom mounted a small breather on the can and blocked off the vaccum nipple on the IM. I hope I don't get owned by a misfire. It should be good for keeping some blow by vapor out of the combustion chamber.
That's interesting when I look at the Helms diagram on the PCV system, it shows fresh air being drawn from the intake arm.
That's interesting when I look at the Helms diagram on the PCV system, it shows fresh air being drawn from the intake arm.
Yes. As long as there is a place for the gases to escape (in your case, the breather on top of the can, you will be fine.