Notices

Problems starting on a new turbo install

Thread Tools
 
Old May 22, 2005 | 01:29 PM
  #11  
dmoney331's Avatar
dmoney331
Thread Starter
Junior Member
 
Joined: May 2005
Posts: 7
Likes: 0
From: Akron, Ohio
Default

Unfortunately I do not have any friends with a gsr. I believe that I am using a 6 psi spring, but i could be completely wrong, and didn't check the one time i got the car started. I think I am gonna give up and just take it to a shop and let them mess around with it, because I am too busy with school, and my beater broke down. Maybe they'll figure it out.
Reply
Old May 24, 2005 | 08:45 PM
  #12  
MY B18c's Avatar
MY B18c
Junior Member
 
Joined: Jun 2002
Posts: 23
Likes: 0
From: honolulu
Default

do you have full msd ignition ,the box ,coil, wires. If you do and you hooked up the msd timing control unit you got to make sure that the timing control unit is made for msd ignitions they have two one for msd ignitions and one for stock same problem I had I had to buy the one 4 msd ignitions hope this helps
Reply
Old May 26, 2005 | 06:35 AM
  #13  
92teg's Avatar
92teg
Senior Member
 
Joined: May 2002
Posts: 129
Likes: 0
From: texas
Default

My car did the exact same thing when I put in my turbo. I changed you the wires spark plugs, rotor. Checked everything and nothing would work. I got a new coil and the car started fine after I put that in.
Reply
Old May 26, 2005 | 08:53 PM
  #14  
dmoney331's Avatar
dmoney331
Thread Starter
Junior Member
 
Joined: May 2005
Posts: 7
Likes: 0
From: Akron, Ohio
Default

That is exactly what my problem was. We replaced the coil and the car started right up and runs perfectly. Thanks guys!
Reply
Old May 26, 2005 | 09:07 PM
  #15  
LT's Avatar
LT
The deer had to die!
 
Joined: Jun 2002
Posts: 39,835
Likes: 0
From: Fussa, Japan
Default

i blew 2 coils on my GSR in 2 months.
Reply




All times are GMT -8. The time now is 09:17 AM.