buy new emblems and put LOTS OF GORILLA SUPER GLUE ON IT

 

dont be dumb. i was being serious.

if you glance at the car, you cant even tell the tape is there. and it doesnt show up on any pictures either

 

so for the front bumper holes?? can u just melt the plastic together and sand it down that way or what...? i have a friend who can weld and ill sand the rear spots where i took my emblems off but..what about the front emblem...

the tegs look cooler with no badges...i just want my back acura to say honda and shave my acura emblems off...or everything..

 

1) Buy new ones from Acura
2) Fill those puppies in with bondo or whatever the heck you want
3) Be ghetto and steal them off another car
4) Be ricey and get the colored ones off eBay so that they can get stolen again
5) Leave it

All you need to take off the emblem is an ID card, slide it in the back of it, push it down to the lil holes, and bend it. *POP* There is your emblem. I did this one my own car so STFU! Just trying to spread the wealth of knowledge, ya know!

 

Mine got jacked too, Plus they keyed my car, and it wont look right to just paint an area trust me on this one. <---From Experiance

 

The only 94+ Integra I have ever seen in a junkyard was a fire damaged GS-R shell, with the roof cut off and the VIN's scraped out. The only way I could tell it was a GS-R was because the cluster was still there, and along with the dash and some suspension parts, was the ONLY parts left on it.

I don't know about where you live, but around here, 94+ Integras are stipped within ten minutes of arriving at the yard.

Anyway, back on topic: I would either buy new Acura emblems or replacement Honda emblems.

On that note, my car is "shaved," but only because it had no holes from the factory.

 

Easiest way to get them off with least risk of damaging your car is to use some strong string and slide it under the emblem and just pop it off. This way no scratches.