ITR All Motor..........What to do!?
been there done that
Joined: Jun 2002
Posts: 30,637
Likes: 0
From: 916
every hp rating you'll see from the manufacturer is hp measured at the crank. there's usually a ~15% loss of power through the drivetrain. jdm itr b18c's are rated at 200bhp not 220.
Last edited by Snoopy; May 8, 2007 at 06:36 PM.
Junior Member
Joined: Aug 2006
Posts: 23
Likes: 0
From: mile high
there are alot of b16s making over 300 on stock blocks, after that new rods would be adviced, personally I would stay with oem valves cuz there is nothing wrong with them for the HP you are looking for, crower 304s are a great cam go to google and type in most HP on stock b16 and get a few ideas