Notices
Engine Swaps, Tech & Tuning Swaps, N/A Performance, Forced Induction, Engine Management, & Troubleshooting

Engine swap

Thread Tools
 
Old Jan 7, 2007 | 04:37 AM
  #61  
byebye_gti's Avatar
byebye_gti
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 56
Likes: 0
Default

What do you think of these gears with a 4.9 fd.



Final Gear 4.900................RPM(shiftpoint..............MPH.............RPM Drop

1st Gear Ratio 3.230............9,000..........................39.66

2nd Gear Ratio 2.105............9,000...........................60.86...............5,865

3rd Gear Ratio 1.458............9,000...........................87.87................6,234

4th Gear Ratio 1.107............9,000..........................115.73...............6,833

5th Gear Ratio 0.848............9,000..........................151.07................6,894

Last edited by byebye_gti; Jan 7, 2007 at 04:54 AM.
Reply
Old Jan 7, 2007 | 01:20 PM
  #62  
Snoopy's Avatar
Snoopy
been there done that
 
Joined: Jun 2002
Posts: 30,637
Likes: 0
From: 916
Default

that'll give you nice acceleration but your cruising rpm's are going to suck

play around with this gear ratio calculator: http://www.fatboyraceworks.com/gears/
Reply
Old Jan 8, 2007 | 11:53 AM
  #63  
byebye_gti's Avatar
byebye_gti
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 56
Likes: 0
Default

I cant seem to find any info for a ukdm s9b gearbox

Dose anyone know of any websites that list the ukdm s9b gear ratios.
Because i am not sure if it has the 4.2 or the 4.4 FD(or it might have something els) some people say it is 4.2 and some say its 4.4

Any info will be most gratefull.
Reply
Old Jan 8, 2007 | 12:03 PM
  #64  
Snoopy's Avatar
Snoopy
been there done that
 
Joined: Jun 2002
Posts: 30,637
Likes: 0
From: 916
Default

tell me this. what is your cruising rpm at 128kmh?
Reply
Old Jan 8, 2007 | 01:23 PM
  #65  
byebye_gti's Avatar
byebye_gti
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 56
Likes: 0
Default

I dont know because the s9b box came with the b18c4 which is standard.
The on in my car at the moment is a y21 and i know what the ratios are.

And how was you going to work out the ratios?
Reply
Old Jan 8, 2007 | 01:48 PM
  #66  
Snoopy's Avatar
Snoopy
been there done that
 
Joined: Jun 2002
Posts: 30,637
Likes: 0
From: 916
Default

128kmh = ~80mph. with my gsr tranny im at 4krpm @80mph. so if you were close to that it'd be safe to say the tranny's would be similar.
Reply
Old Jan 9, 2007 | 11:26 AM
  #67  
byebye_gti's Avatar
byebye_gti
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 56
Likes: 0
Default

After hours and hours of searching i have found this http://joooe.webhs.org/vti/specs.html

And it had to be rubbish news i have got a 4.266FD
Reply




All times are GMT -8. The time now is 12:24 AM.