Zc Help Asap!!!

Reply Subscribe

Thread Tools

Sep 23, 2002 | 11:37 AM

SlowCivicHmm

Thread Starter

Senior Member

Joined: Jul 2002

Posts: 111

Likes: 0

From: Phoenix, AZ

Zc Help Asap!!!

I ordered MSD stuff for my ZC and didn't fit...

88 Teg cap modded for external coil
91 CRX Si wires

and the MSD coil....its universal so that's kewl.....

The wires didn't fit and the cap didn't line up....what should I order.....

Sep 23, 2002 | 12:00 PM

WhiteRice

Senior Member

Joined: Jun 2002

Posts: 967

Likes: 0

From: Denver, CO

89 Teg Cap and wires is what you need.

Sep 23, 2002 | 12:17 PM

SlowCivicHmm

Thread Starter

Senior Member

Joined: Jul 2002

Posts: 111

Likes: 0

From: Phoenix, AZ

aight thanks...later...I'll try that...do you know this from experience or just rumor.......I need to be sure...

Sep 23, 2002 | 12:19 PM

SlowCivicHmm

Thread Starter

Senior Member

Joined: Jul 2002

Posts: 111

Likes: 0

From: Phoenix, AZ

and I got the OBD 1 black top ...any difference on that??

Sep 23, 2002 | 12:30 PM

WhiteRice

Senior Member

Joined: Jun 2002

Posts: 967

Likes: 0

From: Denver, CO

Thats the normal one right?? DOHC ~130-140hp?? If so then those are what I bought. I get confused with obd, obd 1....so if this isn't the normal everyday DOHC ZC, i could be wrong.

Sep 23, 2002 | 12:43 PM

crxrocks

Senior Member

Joined: Sep 2002

Posts: 101

Likes: 0

From: Denver, CO

No, not OBDI, non OBD or OBD0 is what you need ... '89 Teg will get you that.

Chris

Sep 23, 2002 | 12:47 PM

WhiteRice

Senior Member

Joined: Jun 2002

Posts: 967

Likes: 0

From: Denver, CO

non obdI obd OG POD...it all sounds the same to me!!!!!

Sep 23, 2002 | 01:41 PM

SlowCivicHmm

Thread Starter

Senior Member

Joined: Jul 2002

Posts: 111

Likes: 0

From: Phoenix, AZ

k...I just checked my cap/rotor...my cap has a big crack in it.....really bad!!! Well check this...my cap from my old 92 SOHC vtec motor (RIP) fit...it worked too.....is that odd or what???

let me know.....