Notices

Hesitation?

Thread Tools
 
Old May 21, 2005 | 04:29 PM
  #1  
ED9man's Avatar
ED9man
Thread Starter
driver
 
Joined: Apr 2004
Posts: 7,600
Likes: 0
Default Hesitation?

My car hestitates when I give it gas, its not really bad but its noticeable and annoying. What could cause it? Thanks.
Reply
Old May 21, 2005 | 05:39 PM
  #2  
sherwood's Avatar
sherwood
I missed Sean
 
Joined: Aug 2004
Posts: 11,285
Likes: 1
From: Fairfield/Bridgeport CT
Default

injector cleaner(100% iso) $3 at any gas station, and i'd use it twice (two differnt fill ups) and then again every 3-6 months
Reply
Old May 22, 2005 | 05:00 AM
  #3  
Fire's Avatar
Fire
wanna run
 
Joined: Aug 2004
Posts: 4,561
Likes: 0
Default

man, dont even bother. gas is so clean now days, injector cleaner is just another way to get money from people. I would do the simple tune up first, which you probably have, including wires (and c&r) and fuel filter.
Reply
Old May 22, 2005 | 09:24 AM
  #4  
ED9man's Avatar
ED9man
Thread Starter
driver
 
Joined: Apr 2004
Posts: 7,600
Likes: 0
Default

Originally Posted by firefastsi
man, dont even bother. gas is so clean now days, injector cleaner is just another way to get money from people. I would do the simple tune up first, which you probably have, including wires (and c&r) and fuel filter.
done, done, and done.

I am trying to isolate possible reasons it is doing this, I have taken care of all those things.
Reply
Old May 22, 2005 | 09:39 AM
  #5  
Tankard's Avatar
Tankard
Senior Member
 
Joined: Nov 2004
Posts: 1,014
Likes: 0
Default

My 91 crx si hesitated and spit and sputtered on ocassions while accelertating(obvioulsy the fuel pump cutting out where the main relay was messed up). I could never figure out that problem. I even changed the darn fuel pump for no reason. It was recently hard to crank up after driving. I heard where the fuel pump did not cycle on like it should when the igition was turned on. It finally cycled on and cranked. It was the main relay. I took it out and resoldered the solder points in it. I could see where two of the solder points had seperated. Like a little crack. It solved all of my problems. Here is the post i read that made me decide to take it out and give it a try. https://www.honda-acura.net/forums/s...ght=main+relay
Not saying this is your poblem, but it was mine.
Reply
Old May 22, 2005 | 10:25 AM
  #6  
StreetRacingCRX's Avatar
StreetRacingCRX
None
 
Joined: Mar 2005
Posts: 259
Likes: 0
Default

New Spark Plugs and wires
Reply
Old May 22, 2005 | 10:26 AM
  #7  
StreetRacingCRX's Avatar
StreetRacingCRX
None
 
Joined: Mar 2005
Posts: 259
Likes: 0
Default

If that doesnt work it might be your distributor. Does it only do it when you first give it gas then doesnt hesitate after like 3000 rpm?
Reply
Old May 22, 2005 | 10:57 AM
  #8  
CroCivic90DX's Avatar
CroCivic90DX
Registered User
 
Joined: Jan 2005
Posts: 67
Likes: 0
From: Croatia, Europe
Default

I have the similar problem. When i step on it while it is around 2000rpms, it jerks and thinks twice about accelerating. And yes, it goes smoothly after 3000rpms. No vacuum leaks, new spark plug wires, new distributor cap and rotor. Relatively new spark plugs. New fuel filter too. It's smoking oil like mad though.
Reply
Old May 22, 2005 | 03:03 PM
  #9  
ronin84's Avatar
ronin84
Registered User
 
Joined: Sep 2004
Posts: 21
Likes: 0
Default

mine did that too, distributor problem...
Reply
Old May 22, 2005 | 09:53 PM
  #10  
StreetRacingCRX's Avatar
StreetRacingCRX
None
 
Joined: Mar 2005
Posts: 259
Likes: 0
Default

run fuel system cleaner also, it doesnt hurt to help even a little, plus it helps smoking problems a lot atleast for me
Reply



All times are GMT -8. The time now is 05:13 AM.