how do I get the all the rear plastic trim out including the big pieces around the struts. I'm pulling out the si interior but last I tried it to do this I cracked a piece pretty bad.

 

you mean to tell me you all just break your stuff apart to remove the interior.

 

how can I get out the rear seat that would at least be a start.

 

Rear seat is easy...

1. Between the top part of the seats (on it's hinge part) and the interior panels on the outside are small black rings, pop off the rings, they allow you to move the seat to the side about 1/2''.

2. Push the seats towards the outside of the car and pull up, that part of the seat should come out, do the same for the other side.

3. The bottom part is only held in by 1 12mm bolt, undo the bolt, flip up the seats and pull them up. Done.

 

www.helminc.com best manual you can buy...it tells you how to get these pieces off

 

They are out of the manual for our car. I went and was going to buy one 10 minutes ago and saw it was out of stock.

 

you don't necessarily have to get the manual for your model year...i have an 88 crx but got the 89 crx manual b/c they were out of the one for my model year...there are small changes between the models but nothing big