bigace

sup guys,

i am looking to install a 2 channel high power amp to push two 12" infinitis'. would you guys have a step by step blue print on how i can wire all this. i spent a lot of money on the amp so i don't wanna short it. if you have diagrams or pics to wire in either series or parallel , that would be great!

thanks in advance!

peace

jgrotkier

didn't the amp come with a manual?

Either way, its pretty straight forward, I mean you won't be bridging it since its only a 2 channel amp, so just put the + on the + and the - on the -:thumbup:

b00gers

to make it easier, you have to post which model amp you have and which model subs.

you will have to know the OHM ratings on those subs, and if they are SVC or DVC. Then you have to know the power ratings on the amp, to see how you can get the most power out of it.

you can bridge a 2-CH, whether you SHOULD with that amp...well you gotta list the specs.