Vehicle Wiring Diagrams Database.
Thread Starter
Senior Member
Joined: Nov 2007
Posts: 407
Likes: 0
for sure bud, if you need instructions how to remove the radio if you plan to upgrade feel free to ask. may i ask wheat you are planning to do? audio or security/remote starts?
Last edited by Tedmond; Mar 5, 2008 at 03:59 AM.
Thread Starter
Senior Member
Joined: Nov 2007
Posts: 407
Likes: 0
its at the top of the page, look for RSX and it will be there. Radio pin out and wire colours all labeled. I suggest you spend 12bucks and get a radio harness. if you live in canada like i do, head to a canadian tire and grab their wiring harnesses they are $9.99. this will save you the hassle of cutting wires and making mistakes.
Junior Member
Joined: May 2008
Posts: 1
Likes: 0
From: ca
bose amplifier/2004 acura mdx
i located the bose amp for the sub and center channel but i wold like to install line output converters to catch a clean signal after the fac. amp. i am installing a 4 ch. amp for the hi and a amp for a prefab box... any help would be greatly appr.
Junior Member
Joined: Jun 2008
Posts: 1
Likes: 0
From: florida
hey, here you go. from now on, i will post both audiovox and scytek diagrams as one so those that are unsure can cross referance their wires and make sure which is correct. http://www.4shared.com/file/31819435...rd_4_Door.html
just a note to you h23sirlude, the door trigger wire is:
BLACK/WHITE (-) located @ DRIVERS KICK PANEL. usually it will be easily seen, if not, it will be in a gray plug, high up in the dash area. Always test with a DMM (digital volt meter) do not use test lights !!
just a note to you h23sirlude, the door trigger wire is:
BLACK/WHITE (-) located @ DRIVERS KICK PANEL. usually it will be easily seen, if not, it will be in a gray plug, high up in the dash area. Always test with a DMM (digital volt meter) do not use test lights !!
