Just Got a Solabaric S12L5 Woofer for my Integra
08-09-2005, 08:08 AM
#1
Senior Member
Thread Starter
Join Date: Aug 2005
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Just Got a Solabaric S12L5 Woofer for my Integra
What would be the set up? I was going to get two but i figured i was limited by trunk space??? What would you guys suggest?
What do you have, etc???
What do you have, etc???
08-09-2005, 09:39 PM
#4
Join Date: Jun 2001
Location: oakland, ca
Posts: 58,578
Likes: 0
Received 0 Likes
on
0 Posts
Depends all on your budget. Check out the first thread in this forum, pretty nice sound in some of those whips.
I have a set of 5.25" woofers and Xovers for sale, as well as a 2 ch amp. Check sig.
I have a set of 5.25" woofers and Xovers for sale, as well as a 2 ch amp. Check sig.
__________________
.
.
08-24-2005, 06:35 PM
#5
Senior Member
Thread Starter
Join Date: Aug 2005
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
I am trying to find an amp to power my S12L5... My bro says I need a mono amp that handles 2ohm...
I found something that might fit that description...
"Rockford Fosgate P3001 - Rockford Fosgate 900 Watt Mono Amplifier"
Can someone verify if it is the right amp to power my sub up???
I found something that might fit that description...
"Rockford Fosgate P3001 - Rockford Fosgate 900 Watt Mono Amplifier"
Can someone verify if it is the right amp to power my sub up???
08-24-2005, 06:36 PM
#6
Senior Member
Thread Starter
Join Date: Aug 2005
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
Here are the Rockford Fosgate P3001 - Rockford Fosgate 900 Watt Mono Amplifier specs...
Mono Amplifier
150 watts RMS x 1 at 4 ohms
300 watts RMS x 1 at 2 ohms
900 watts Peak output at 2 ohms
2-ohm stable
CEA compliant
Tri-Way capable
Variable low-pass crossovers (40-400 Hz at 12 dB/octave)
MOSFET power supply and output stages
MEHSA technology
TOPAZ noise-killing differential inputs
Selectable Punch Bass 0/6/12 dB Punch Bass boost at 45 Hz
Transana circuitry
NOMAD advanced protection circuitry
11"W x 2-7/16"H x 11-11/16"D
Mono Amplifier
150 watts RMS x 1 at 4 ohms
300 watts RMS x 1 at 2 ohms
900 watts Peak output at 2 ohms
2-ohm stable
CEA compliant
Tri-Way capable
Variable low-pass crossovers (40-400 Hz at 12 dB/octave)
MOSFET power supply and output stages
MEHSA technology
TOPAZ noise-killing differential inputs
Selectable Punch Bass 0/6/12 dB Punch Bass boost at 45 Hz
Transana circuitry
NOMAD advanced protection circuitry
11"W x 2-7/16"H x 11-11/16"D
08-26-2005, 04:27 AM
#9
Join Date: Jan 2004
Location: Bethlehem PA
Posts: 6,692
Likes: 0
Received 0 Likes
on
0 Posts
I have 1 S12L5 powered by an audiobahn amp A8000T mono amp.
# 4Ω Mono : 400W x 1 RMS
# 2Ω Mono : 800W x 1 RMS
This is good enough to power that single sub.
my amp for highs is an audiobahn amp also.
# 4Ω Mono : 400W x 1 RMS
# 2Ω Mono : 800W x 1 RMS
This is good enough to power that single sub.
my amp for highs is an audiobahn amp also.