hi, i'm brand new to the forums. i read a previous post about going to installdr.com, but they didn't exactly what i was looking for, but it helpped me somewhat.

anyhow, i have a 95 integra and i'm having trouble removing the stock cassette deck player. i see the two screws that i have to remove, but i can't seem to remove them. there's a black tube on the left side with all the wiring blocking my screwdrivers way to left screw; and the rest of the wiring is on the right side blocking the other screw. the guide on installdr shows only the 90-93 model of the integra which doesn't have the wiring there. do i have to remove the framing or perhaps the wiring? i already tried to move the square thing (sorry i don't know the name of it, i'm not really into cars) with all the wiring going into it, but it wont move. does anyone know how i should approach removing the screws? thanks.

 

this might help
http://www.morningz.com/mz/integra/audio.asp

 

On my 91 accord i had to remove 4 screws holding in the console so i could remove it and reach everything better,Then i had to take out the ashtray and there was 2 screws under the dash holding in the radio/storage tray assembly then i had to seperate the radio from the storage trayand it was simple

Now i Have a 2001 Sony deck (with the smooth black motorized face with the controls on the other side) a 500watt Jensen 2ch Amp with 2 10"Mtx Blue Thunders in a ported box and Lightning Audio 4" 2ways in the front and 6x9" 3ways in the back with all new 12 guage wiring to the speakers and 8 guage to the amp and it sounds really good