installed forbidden shifter today
Originally posted by AcsRcool
I lubricated all of the linkage and the collar on the lever connector and put the console back.
I lubricated all of the linkage and the collar on the lever connector and put the console back.
did you just get a new bolt, or did you get that bushing also (parts 26 and 27 in the prelude shifter assembly diagram, hondaautomotiveparts.com). i ordered a bushing but the dealer told me that the bolt won't be available until sometime after mid-august. BULLSHIT. is there anyone that can find one earlier that wouldn't mind picking one up for me? otherwise i gotta search the junk yards
Honestly I don't even think you need part 26. You'll be just fine finding the same size bolt at a hardware store. Find one that fits the nut that holds your old shifter in place and you're set (get one about 1.5-2 inches long). There's nothing really special about part 26, it's just a bolt with some hook on it but the hook is useless, I didn't need it for anything it's just sitting there.
Originally posted by chuanger
Honestly I don't even think you need part 26. You'll be just fine finding the same size bolt at a hardware store. Find one that fits the nut that holds your old shifter in place and you're set (get one about 1.5-2 inches long). There's nothing really special about part 26, it's just a bolt with some hook on it but the hook is useless, I didn't need it for anything it's just sitting there.
Honestly I don't even think you need part 26. You'll be just fine finding the same size bolt at a hardware store. Find one that fits the nut that holds your old shifter in place and you're set (get one about 1.5-2 inches long). There's nothing really special about part 26, it's just a bolt with some hook on it but the hook is useless, I didn't need it for anything it's just sitting there.

Originally posted by mayonaise
what did you use to lube it up?
did you just get a new bolt, or did you get that bushing also (parts 26 and 27 in the prelude shifter assembly diagram, hondaautomotiveparts.com). i ordered a bushing but the dealer told me that the bolt won't be available until sometime after mid-august. BULLSHIT. is there anyone that can find one earlier that wouldn't mind picking one up for me? otherwise i gotta search the junk yards
what did you use to lube it up?
did you just get a new bolt, or did you get that bushing also (parts 26 and 27 in the prelude shifter assembly diagram, hondaautomotiveparts.com). i ordered a bushing but the dealer told me that the bolt won't be available until sometime after mid-august. BULLSHIT. is there anyone that can find one earlier that wouldn't mind picking one up for me? otherwise i gotta search the junk yards
haha, actually, what i did was get a longer 6 mm bolt that didnt have a thread on it at the bottom, i cut it to the size i needed and threaded it to fit the honda nut, it slid perfectly into the collar and i used standard mechanics white lube to make it nice and smooth, i had my custom bolt, the collar, and the honda nut and everything is nice and smooth. . .
good luck guys
good luck guys
Originally posted by XprincoX
Well if you really want just call around different dealers. They should be able to special order it for you. And it should only take a week max. Or you can order it on the website: here tho shippings kinda high...
Well if you really want just call around different dealers. They should be able to special order it for you. And it should only take a week max. Or you can order it on the website: here tho shippings kinda high...
majestic honda is back-ordered too
just my luck, there are absolutely no junk yards even remotely near by that have that part. apparently none of them have a manual transmission prelude - in fact, i didn't even get that far when i was asking them. none of them even have 92-96 preludes! most of them are non-english speaking asswipes, too. :madfawk: i did find one place that *might* have them. but they only sell the entire transmission, and i guess everything that relates to the transmission... won't sell me a lousy ****ing bolt.
looks like i gotta urgent order from honda... dammit... in the meanwhile i'll probably improvise with a bolt/nut from a hardware store. but dammit
looks like i gotta urgent order from honda... dammit... in the meanwhile i'll probably improvise with a bolt/nut from a hardware store. but dammit


