Need Help Identify Part
Faster than your Geo
Joined: Jun 2002
Posts: 821
Likes: 0
Originally posted by sickhonda
Yo, hold on a sec here, Lager. :screwy:
I don't know what I said wrong that offended you. If you're not happy with the work you do, or the money you spent for tools, don't take it out on me. I was merely trying to find some assistance on identifying parts and certainly not looking for personal attack. You don’t even know the whole story and you’re already yapping your mouth like a BITCH.
I went to the nearest local Honda dealer in my area to buy this part but the “parts counter person” doesn’t have an idea what I’m talking about. Remember, “P-A-R-T-S C-O-U-N-T-E-R P-E-R-S-O-N”…NOT a “M-E-C-H-A-N-I-C”(slow enough for you?) If your so smart and a true mechanic, you should be familiar that no one is allowed in the WORK AREA of the shop for any reason due to safety and insurance concern…meaning (just to help you out…since your slow :doh: ) I can’t even get close to a mechanic to discuss my issue, or in your case, waste their time for free advice. The “parts counter person”, again, "parts counter person" suggested, initially, that I should bring my car to see the part in question. I did exactly that, but when I got there he refused to leave his counter to take a look at it, he claimed he was too busy (while turning pages on his car magazine...and I was the only one there at that time) and suggested instead that I should just have my car service by their mechanic...now tell me if that’s not a rip off. Next time, before you run your mouth like that again, ask first so you don’t sound stupid at the end. :nono: :madfawk:
My intention was to save money on repair because I’m currently separated from the work force. I can assure you that if I have money for repair I would, to make things easy. I’m mechanically incline and have all the time in the world to mess around with my car, so right now that’s the least expensive option for me.
If you have no intention to help in the first place…get off this forum. Last time I checked, the forum’s purpose is to exchange ideas and for assisting others…not for attacks. Even if you know the part…keep it to yourself and die with it :gives: …I couldn’t care less. I’m seeking assistance from someone really knowledgeable anyway…someone with a brain…not all mouth. :blah:
:madfawk: :madfawk: :madfawk:
Yo, hold on a sec here, Lager. :screwy:
I don't know what I said wrong that offended you. If you're not happy with the work you do, or the money you spent for tools, don't take it out on me. I was merely trying to find some assistance on identifying parts and certainly not looking for personal attack. You don’t even know the whole story and you’re already yapping your mouth like a BITCH.
I went to the nearest local Honda dealer in my area to buy this part but the “parts counter person” doesn’t have an idea what I’m talking about. Remember, “P-A-R-T-S C-O-U-N-T-E-R P-E-R-S-O-N”…NOT a “M-E-C-H-A-N-I-C”(slow enough for you?) If your so smart and a true mechanic, you should be familiar that no one is allowed in the WORK AREA of the shop for any reason due to safety and insurance concern…meaning (just to help you out…since your slow :doh: ) I can’t even get close to a mechanic to discuss my issue, or in your case, waste their time for free advice. The “parts counter person”, again, "parts counter person" suggested, initially, that I should bring my car to see the part in question. I did exactly that, but when I got there he refused to leave his counter to take a look at it, he claimed he was too busy (while turning pages on his car magazine...and I was the only one there at that time) and suggested instead that I should just have my car service by their mechanic...now tell me if that’s not a rip off. Next time, before you run your mouth like that again, ask first so you don’t sound stupid at the end. :nono: :madfawk:
My intention was to save money on repair because I’m currently separated from the work force. I can assure you that if I have money for repair I would, to make things easy. I’m mechanically incline and have all the time in the world to mess around with my car, so right now that’s the least expensive option for me.
If you have no intention to help in the first place…get off this forum. Last time I checked, the forum’s purpose is to exchange ideas and for assisting others…not for attacks. Even if you know the part…keep it to yourself and die with it :gives: …I couldn’t care less. I’m seeking assistance from someone really knowledgeable anyway…someone with a brain…not all mouth. :blah:
:madfawk: :madfawk: :madfawk:
For a guy with less than 30 posts on the board, you run your mouth an awful lot too. There hasn't been a lot of reply to this thread and you should be more patient.
When you two are done being equal asses to each other, maybe someone will be willing to help you.
And so this response is not a complete waste of time equal to what i spent reading the trash you and Lager have written, I'd say that if the SE has ABS (I dont remember if it does), than jfiedler is more than likely correct.
Also, for future reference, most honda parts guys are trained very well in identifying parts in different cars. In most cases, their failure to do so is due to inadequate explaination or terminology on the part of the customer, not themselves. If your parts guy really is a lazy prick, exercise your right as a customer and talk to his manager. If you bitch about it on here, you are bitching to the wrong people.
Thread Starter
Junior Member
Joined: Jun 2003
Posts: 29
Likes: 0
From: Terror Target, USA
Originally posted by AcsRcool
thats right, this is a forum for the exchange of knowledge and information, but the attack you just made against a fellow forum member makes you a bigger hypocrite than he is an ass.
For a guy with less than 30 posts on the board, you run your mouth an awful lot too. There hasn't been a lot of reply to this thread and you should be more patient.
When you two are done being equal asses to each other, maybe someone will be willing to help you.
And so this response is not a complete waste of time equal to what i spent reading the trash you and Lager have written, I'd say that if the SE has ABS (I dont remember if it does), than jfiedler is more than likely correct.
Also, for future reference, most honda parts guys are trained very well in identifying parts in different cars. In most cases, their failure to do so is due to inadequate explaination or terminology on the part of the customer, not themselves. If your parts guy really is a lazy prick, exercise your right as a customer and talk to his manager. If you bitch about it on here, you are bitching to the wrong people.
thats right, this is a forum for the exchange of knowledge and information, but the attack you just made against a fellow forum member makes you a bigger hypocrite than he is an ass.
For a guy with less than 30 posts on the board, you run your mouth an awful lot too. There hasn't been a lot of reply to this thread and you should be more patient.
When you two are done being equal asses to each other, maybe someone will be willing to help you.
And so this response is not a complete waste of time equal to what i spent reading the trash you and Lager have written, I'd say that if the SE has ABS (I dont remember if it does), than jfiedler is more than likely correct.
Also, for future reference, most honda parts guys are trained very well in identifying parts in different cars. In most cases, their failure to do so is due to inadequate explaination or terminology on the part of the customer, not themselves. If your parts guy really is a lazy prick, exercise your right as a customer and talk to his manager. If you bitch about it on here, you are bitching to the wrong people.
I guess, what you’re saying, I need to be a post whore to be respected by someone like YOU. Sorry about that, I’ve been very picky on the post I reply to…only to what I think I have an answer to or something I have to contribute. Granted, I don’t know much but that is the exact reason I’m here in the first place…to learn, like any other DIY’s. I’m not like most of the post whores here, quick to jump to a conclusion, or to someone with criticisms.
In case you missed it from my previous reply to Lager, ASKING FIRST is the best way rather than attacking a person or jumping to your own conclusion. I must have missed the part of the agreement, “share your whole horror experience first before posting”, to make everything clear to all forum members. For your information, I’m not as stupid as you think. I did bitch to the DEALER MANAGER and I got nowhere, maybe they all have the lazy prick attitude. The case is now with “Better Business Bureau” to deal with.
Sorry for wasting your time reading our post, but you wasted mine and yours by replying with more BULLSHIT…please, tell me that’s smart and not HYPOCRITE?
As for being impatient for a reply (again jumping to a conclusion), I was merely trying to move my post back up front for everyone to see. I felt that I screwed up by posting it initially without pics. Tell me your not guilty of the same crime, remember this post?...https://www.honda-acura.net/forums/s...hreadid=83993. I think I see more urgency in my problem than yours.
Sorry for being an ass in defending myself. I guess I did it because I was attacked first…what is your EXCUSE…I don’t recall attacking you? Ohhh…only to be a POST WHORE!
I have 745-post…weeeeeeeeee!
Totally forgot that you’re the type of guy easily excited by little things like these. Remember this post? https://www.honda-acura.net/forums/s...threadid=83005
Weeeeeeeeee, I can detail my own car at work!
Did I complain about you wasting my time then?
What if I tell you I pilot planes for a living and I flew all over the world…do you see me posting 15 pics of the same plane on some forum, wasting everybody else’s time and not to mention the server space? Get real and get a life first before you comment on somebody else’s.
Show me that you’re a better person and REPLY to this (adding one more to your post count)…or take your own advice and learn!
In my opinion, even Lager is a better person than you.
BTW, jfiedler, and all others who tried…THANKS!!!
As for you AcsRcool, since you did not contribute anything and for being a POST WHORE :madfawk: