20 will kill a stock engine in no time flat. You really do not sound like you should be looking into a turbo. It's not a rumor, it's accurate information. anytime you are going to run your car hard it should be up to operating temperature. "At least 20psi", you really should do some research.

 

ok, tell me this then...

Ok I want to do 10 PSI I have been reading alot into all of the work and the pistons, valve springs, wastegates, intercoolers, T3-T4 turbos and etc. I have learned that 20 PSI is a little too high and I should stick around 10-12 so says my performance shop in town...anyways so if I chnaged out my pistons, injectors, rings, rods, and got myself a new fuel rail and a turbo timer I would be good to go right..because I know someone who can hook me up as far as the engine parts go....

 

If you did all of that other work and it was done properly, 10-12psi is probably going to be ok.

 

this is hella old

 

Way to bring up a thread from forever ago :goodjob:

 

It's Alive!!

 

i say u spend some of ur money and drop that jacked up accord in ur sig....