??Suspension Installation??
where did u order the fender lining from nightrider? i have the same problem, but only on my passenger side and my cai filter is soooo dirty that im not even sure it is still usable. i ahve to clean it like once every 2-3 weeks since there is so much grease on it, and not all of it comes out.
I got em' from www.1autobodyparts.com
From what I searched they have the cheapest stock parts online.
What you use to clean the your CAI, cuz mine is looking grimmy.
From what I searched they have the cheapest stock parts online.
What you use to clean the your CAI, cuz mine is looking grimmy.
i use dish washing detergent in warm water. what i do is this:
1: find a small bucket and fill it up with water
2: add dishwashing detergent and mix
3: submerge the whole filter in bucket and move it up & down
4: let it sit for like an hour
5: wash off detergent and use k&n filter recharge kit.
this is how i clean my filter ever since i had all that grease/dirt on it from driving without the fender lining.
1: find a small bucket and fill it up with water
2: add dishwashing detergent and mix
3: submerge the whole filter in bucket and move it up & down
4: let it sit for like an hour
5: wash off detergent and use k&n filter recharge kit.
this is how i clean my filter ever since i had all that grease/dirt on it from driving without the fender lining.
Ight i been procrastinating on this installation...
I'm ganna try to do this weekend wit my cuzo....
Anybody know of any step by step with pics on this installation?
I ordered the chiltons book so it should be here by the end of the week or mid next week.
I wanna get a head start on this before the weeked.
For those of you who have installed springs and shocks
1. How many hours will i spend on this installation?
2. do i need an alignment after installation?
3. when i raise the car .. can i use the regular lift in the trunk or would it be safer to get a pair of stands?
I'm ganna try to do this weekend wit my cuzo....
Anybody know of any step by step with pics on this installation?
I ordered the chiltons book so it should be here by the end of the week or mid next week.
I wanna get a head start on this before the weeked.
For those of you who have installed springs and shocks
1. How many hours will i spend on this installation?
2. do i need an alignment after installation?
3. when i raise the car .. can i use the regular lift in the trunk or would it be safer to get a pair of stands?
Originally posted by NightRider79
1. How many hours will i spend on this installation?
2. do i need an alignment after installation?
3. when i raise the car .. can i use the regular lift in the trunk or would it be safer to get a pair of stands?
1. How many hours will i spend on this installation?
2. do i need an alignment after installation?
3. when i raise the car .. can i use the regular lift in the trunk or would it be safer to get a pair of stands?
2. it's recommended, because your toe could be off and it'll ruin your tires quicker than negative camber
3. stands...with stuff like this (a 3000 lb car in this case), err on the side of caution
1) By yourself, its gonna be a 3 hour+ install
2)not necessarilly, as long as u dont disrupt the axles too bad
3)Its always crazy to go under the car when its proped up only by a jack
2)not necessarilly, as long as u dont disrupt the axles too bad
3)Its always crazy to go under the car when its proped up only by a jack
Once you've got that kit installed, you'll have to let me know how you like it. I thought about going with that exact kit, but figured I'd save money by just getting what I really want... Tein SS Dampers.
Originally posted by NightRider79
3. when i raise the car .. can i use the regular lift in the trunk or would it be safer to get a pair of stands?
3. when i raise the car .. can i use the regular lift in the trunk or would it be safer to get a pair of stands?


