Just wondering what camber kit u guys would suggest, if im gonna go down about 2.75" on my 95 Accord.

THANKS

 

I was thinking Ingall... but not sure which kind...

 

get the hole upper arm camber kit.

 

advantages of doing that? Cuz that route is EXPENSIVE! About 300 for just the front

 

$300 isn't really that bad.

 

Well... but i still have to deal with the back... Another 200 dollars there easy

 

if you use the cheep camber ball joints it raises you upper arm because the ball joint is huge so the you hit a bump and bam upper arm hits the wheel well(thy are fine if you are going for 1-1.5 of an inch but you are going for 3 plus the ball joint has to be pressed in the arm you just put in and go).the rears just use the adjustable upper arm i don't like the lower adjustable arm because that it where a lot of the lode is.

 

Hmmm...
So wut u recommend again?
Wound the ingalls balljoint work?

 

no the front adjustable upper a arm it fits better.and the upper adjustable control arm for the rear is what i would use i have used kits from a company called spc.stay away from the press in adjustable front ball joints and lower adjustable rear control arm.just remember thats my opinion.you use what you want and what fits your budget it good you actually care about camber molest just put on the coil overs and go.any caber kit is better than nothing it will save your tires.

 

so yes thy will work but when you hit a bump the arm might hit the wheel well.i lowed my friends 98 accord we used adjustable ball joints but we went 3 inches down and over bumps his a arms hit so we raised it an inch and it was fine he used coil over if you are using springs you can adjust the ride hight but springs have less play so its all + and -.