Ok well a while back I came to a lot of you hybrid accord guys for help. Recap real quick, I bought a 2000 H22a4 SH motor full swap. Not really know about the ATTS bullshit right. So with that being found out after I bought motor. I get ride of Atts tranny & control box, and bought a 95 JDM base model h22a tranny.
Now this is where I was asking all the questions about how to fabricate a bracket to make the accord half shaft bolt to the block. Well after some help and guidance from members on this site and good info from Alan craft (can’t remember his name here on the forum).
I got the bracket done and I absolutely love the job that was done. So for the people that tend to shy away from the h22a4 sh block cause of the fabrication that needs to be done. No need to anymore. By the way my plans are turbo charging the block. I will have pics soon of the block sleeved with Darton's M.I.D kit, JE 9:0:1 forged pistons, and Scat forged rods.

Sorry for the long story. Here are the long awaited pics.

 

Sorry if some of the pics are to big I was playing around with resizing them.

 

i have no clue what u just said.

 

Basicaly i am sharing some pictures of the fabricated bracket that was made for the accord half shaft to mount to th h22a4 sh block. Since in reality it isnt a direct bolt on since where the half shaft bolts to. that is where the atts system uses to be. Does that kind of clear it up a bit

 

hmm, not sure what a half shaft or a atts is but what yr accord do u have?

 

Allright I want to learn more about this. Did that tranny bolt directly up? Is bolting up the Accord mid shaft the only modifications?

I am swapping a 2001 H22 with the ATTS into a 97 hatch and I wouldn't mind changing the tranny right away.

 

You need to change the tranny to the base model tranny taht is the only way to make SH block work

 

Yeah there is no way you will get the H22A4 motor and ATTS tranny in any other car beside the prelude. I have the SH motor in my accord and I had to fab up a bracket as you can see to get the base model tranny to link up with the H22A4 motor.

 

well we are halfway there, now will someone just get ATTS to work with an accord already?!

 

bro its not going to happen, and if by any chance it does it will have been more hell than what its worth TRUST.