H22A4 Motor Update
Thread Starter
Senior Member
Joined: Oct 2002
Posts: 355
Likes: 0
From: NY/ CT
Ok well a while back I came to a lot of you hybrid accord guys for help. Recap real quick, I bought a 2000 H22a4 SH motor full swap. Not really know about the ATTS bullshit right. So with that being found out after I bought motor. I get ride of Atts tranny & control box, and bought a 95 JDM base model h22a tranny.
Now this is where I was asking all the questions about how to fabricate a bracket to make the accord half shaft bolt to the block. Well after some help and guidance from members on this site and good info from Alan craft (can’t remember his name here on the forum).
I got the bracket done and I absolutely love the job that was done. So for the people that tend to shy away from the h22a4 sh block cause of the fabrication that needs to be done. No need to anymore. By the way my plans are turbo charging the block. I will have pics soon of the block sleeved with Darton's M.I.D kit, JE 9:0:1 forged pistons, and Scat forged rods.
Sorry for the long story. Here are the long awaited pics.
Now this is where I was asking all the questions about how to fabricate a bracket to make the accord half shaft bolt to the block. Well after some help and guidance from members on this site and good info from Alan craft (can’t remember his name here on the forum).
I got the bracket done and I absolutely love the job that was done. So for the people that tend to shy away from the h22a4 sh block cause of the fabrication that needs to be done. No need to anymore. By the way my plans are turbo charging the block. I will have pics soon of the block sleeved with Darton's M.I.D kit, JE 9:0:1 forged pistons, and Scat forged rods.
Sorry for the long story. Here are the long awaited pics.
Thread Starter
Senior Member
Joined: Oct 2002
Posts: 355
Likes: 0
From: NY/ CT