I started a new project this afternoon that I will be working on for a while. I started to lay Dynamat in the trunk of my car today. I will be dynamating the entire car with one layer of extreme dynamat. Also this weekend I will start recreating my trunk panels with fiberglass cladding and will be wraping the peices with Vinyal (SP). I will take pictures along the way and keep everyone posted. I will start working on my box later next week the box will be one 12 with a motorized amp rack under the box. I will also be running my wires this week as well as my parts come in. I am hoping it comes out the way I plan and I hope it sounds good when I complete it.

Sean.

 

cool man, keep us updated and give us some pics!!!!!!!!!!!!!!!!!!!!!!

 

Keep us up to date and post pics when done! Sounds like a fun time over there! :thumbup:

 

nice...where'd u get the dynamat and how much

 

I'd like to see pics too.

 

I bought 4 bulk kits of Dynamat Extreme I only paid for two my friend paid for the other two cause we are doing his car next. I paid I think 100 per box of 36 sq ft.

I will have pictures up this weekend. I am also starting a fiberglass project this weekend. So I will be posting up pictures up of that as well along the way to completion.

 

Sorry for the long period of time for this update.
Here are some Photos of the work that I have been doing.

In these photos I started working on the Dynamat install in the trunk and on the back dash. I also installed my Pioneer Premier DEH850MP. I just purchesed my power wire for my amps and ground wire. I will be running that down the passenger side of the car and the RCA's and Speaker Wire down the driver side of the car. I will take more pictures when I start on that this comming weekend.

While all this is going on I am also working on making a custom fiberglass back dash. Which there are some pictures up of that as well. I will keep updates as I do them.

 

Not loking too bad at all! Keep it up bud!