For people With F-max, a couple of questions.
07-22-2002, 11:00 PM
#1
Senior Member
Thread Starter
Join Date: May 2002
Location: Tucson, AZ
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
For people With F-max, a couple of questions.
1. HOw much did you pay.
2. I was reading on their site it said it came with 2 injectors.. don't you need 4? how many did you get..
3.did it come with a block guard or just the gasket(is it included or is it an option)the one that reduces compression.
4.any dyno FWHP numbers. and 1/4 time?
5. is there any with an auto,
6. did any problems, or anything else that was need to get it to run proprely, such as Apexi V-FAC or came gears.
Thanks
2. I was reading on their site it said it came with 2 injectors.. don't you need 4? how many did you get..
3.did it come with a block guard or just the gasket(is it included or is it an option)the one that reduces compression.
4.any dyno FWHP numbers. and 1/4 time?
5. is there any with an auto,
6. did any problems, or anything else that was need to get it to run proprely, such as Apexi V-FAC or came gears.
Thanks
07-23-2002, 09:56 AM
#2
Senior Member
Join Date: Mar 2002
Location: New Jersey
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
Re: For people With F-max, a couple of questions.
Originally posted by 99accord520
1. HOw much did you pay.
2. I was reading on their site it said it came with 2 injectors.. don't you need 4? how many did you get..
3.did it come with a block guard or just the gasket(is it included or is it an option)the one that reduces compression.
4.any dyno FWHP numbers. and 1/4 time?
5. is there any with an auto,
6. did any problems, or anything else that was need to get it to run proprely, such as Apexi V-FAC or came gears.
Thanks
1. HOw much did you pay.
2. I was reading on their site it said it came with 2 injectors.. don't you need 4? how many did you get..
3.did it come with a block guard or just the gasket(is it included or is it an option)the one that reduces compression.
4.any dyno FWHP numbers. and 1/4 time?
5. is there any with an auto,
6. did any problems, or anything else that was need to get it to run proprely, such as Apexi V-FAC or came gears.
Thanks
2. It comes with 2 EXTRA injectors.
3. When I saw the kit, it either came with a MSD Box or a F-MAX Lower Compression Head Gasket (IDEAL)
4. The best I saw a h22 was around 250whp 1/4 was around 13.3
5. I don't know about that, but I would imagine it would work the same way.
6. If I remember correctly, they come fully programmed so people cannot **** them up, but I think getting a Hondata would help as well.
07-23-2002, 02:11 PM
#3
Stealth bling bling
Join Date: Mar 2002
Location: SoCal by mid July
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
I did read about a 5th gen acccord in the uk (it had SOHC so I'm assuming it's an f22) that was boosting 8psi on a stock block dyno'd at 235hp and estimated 1/4 at 14.0
08-04-2002, 08:02 AM
#6
Junior Member
Join Date: Jun 2002
Location: Oceanside,Ca
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Re: For people With F-max, a couple of questions.
Originally posted by 99accord520
1. HOw much did you pay.
2. I was reading on their site it said it came with 2 injectors.. don't you need 4? how many did you get..
3.did it come with a block guard or just the gasket(is it included or is it an option)the one that reduces compression.
4.any dyno FWHP numbers. and 1/4 time?
5. is there any with an auto,
6. did any problems, or anything else that was need to get it to run proprely, such as Apexi V-FAC or came gears.
Thanks
1. HOw much did you pay.
2. I was reading on their site it said it came with 2 injectors.. don't you need 4? how many did you get..
3.did it come with a block guard or just the gasket(is it included or is it an option)the one that reduces compression.
4.any dyno FWHP numbers. and 1/4 time?
5. is there any with an auto,
6. did any problems, or anything else that was need to get it to run proprely, such as Apexi V-FAC or came gears.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Jokieman31
Integra & 97-01 Integra Type-R
32
03-31-2003 12:26 PM