00 civic interior questions
S2000 Pilot
Joined: Jun 2002
Posts: 2,457
Likes: 0
From: 9000 RPMS
Originally posted by thaveen
id leave the dash the way it is... i have leather gsr seats, from a 95, bolt right up with one hole needing to be drilled in the rail
id leave the dash the way it is... i have leather gsr seats, from a 95, bolt right up with one hole needing to be drilled in the rail
just swap the inner rail with your EX rail and it'll work. There's also a way to use a washer and wedge it to keep that corner down. I'm too lazy so i have 3 bolts in my GSR seats as well.
Cake or Death?
Joined: Jun 2003
Posts: 20,749
Likes: 0
From: NJ
Interior pics
Ignore all the red ricey crap... that's getting changed to gun metal. 
h: Also.. the car is FILTHY... I used one of those florecent shop lights.. that's why it's so glossy in some pics
Front Right
Cup Holder and (Autoh: ) shifter
Drivers Side Door ( I need a new roof - Blaaaaack.h: )
Center Console.. (Need the top wrapped and black carpeting.
)
Right Rear panal... (I'm thinking I may redo these in a flat black instead of gloss)
Rear Deck Eff up... forgot to factor in for the vibration from the speakers (Also didn't clear coat.h: )
Rear deck. Need to wrap those seats!
Rear top... again with the roof.
Glove Box
Bad pic of left front pillar
Under the steering wheel
Teggy Front Seat
h: Also.. the car is FILTHY... I used one of those florecent shop lights.. that's why it's so glossy in some pics Front Right
Cup Holder and (Auto
h: ) shifter Drivers Side Door ( I need a new roof - Blaaaaack.
h: ) Center Console.. (Need the top wrapped and black carpeting.
) Right Rear panal... (I'm thinking I may redo these in a flat black instead of gloss)
Rear Deck Eff up... forgot to factor in for the vibration from the speakers (Also didn't clear coat.
h: ) Rear deck. Need to wrap those seats!
Rear top... again with the roof.
Glove Box
Bad pic of left front pillar
Under the steering wheel
Teggy Front Seat
S2000 Pilot
Joined: Jun 2002
Posts: 2,457
Likes: 0
From: 9000 RPMS
Re: Interior pics
Originally posted by EriksShadow
Ignore all the red ricey crap... that's getting changed to gun metal.h: Also.. the car is FILTHY... I used one of those florecent shop lights.. that's why it's so glossy in some pics
And if anyone's wondering.... Subaru Outback Lit. Ed. Sedan. (Mom's)
Front Right
Cup Holder and (Autoh: ) shifter
Drivers Side Door ( I need a new roof - Blaaaaack.h: )
Center Console.. (Need the top wrapped and black carpeting. )
Right Rear panal... (I'm thinking I may redo these in a flat black instead of gloss)
Rear Deck Eff up... forgot to factor in for the vibration from the speakers (Also didn't clear coat.h: )
Rear deck. Need to wrap those seats!
Rear top... again with the roof.
Glove Box
Bad pic of left front pillar
Under the steering wheel
Teggy Front Seat
Ignore all the red ricey crap... that's getting changed to gun metal.
h: Also.. the car is FILTHY... I used one of those florecent shop lights.. that's why it's so glossy in some picsAnd if anyone's wondering.... Subaru Outback Lit. Ed. Sedan. (Mom's)
Front Right
Cup Holder and (Auto
h: ) shifter Drivers Side Door ( I need a new roof - Blaaaaack.
h: ) Center Console.. (Need the top wrapped and black carpeting.
) Right Rear panal... (I'm thinking I may redo these in a flat black instead of gloss)
Rear Deck Eff up... forgot to factor in for the vibration from the speakers (Also didn't clear coat.
h: ) Rear deck. Need to wrap those seats!
Rear top... again with the roof.
Glove Box
Bad pic of left front pillar
Under the steering wheel
Teggy Front Seat
you are a riceboy and your sig is scary, please make it go away :ugh:
Cake or Death?
Joined: Jun 2003
Posts: 20,749
Likes: 0
From: NJ
I have a 7th gen.... but.. same thing. 
The fronts are direct except for the back bolt closest to the center consol on each side. It's about half an inch too short. I'm running with three bolts right now :rick: I think all I have to do is drill where the Teg bolt would go.. but.. I need to check for two things before I do that:
1. If it's too close to the other hole.. it may make the metal weak
2. Make sure there's nothing important underneath
We looked at swaping out the bottom rails... i.e. Put the Civic ones on the Teg seats... but... I couldn't get some bolts out.. and didn't have any WD-40. So that could work. It looks like it does.... but.. I can't say for sure.
The fronts are direct except for the back bolt closest to the center consol on each side. It's about half an inch too short. I'm running with three bolts right now :rick: I think all I have to do is drill where the Teg bolt would go.. but.. I need to check for two things before I do that:1. If it's too close to the other hole.. it may make the metal weak
2. Make sure there's nothing important underneath
We looked at swaping out the bottom rails... i.e. Put the Civic ones on the Teg seats... but... I couldn't get some bolts out.. and didn't have any WD-40.
So that could work. It looks like it does.... but.. I can't say for sure.