I have a 7th gen.... but.. same thing. The fronts are direct except for the back bolt closest to the center consol on each side. It's about half an inch too short. I'm running with three bolts right now :rick: I think all I have to do is drill where the Teg bolt would go.. but.. I need to check for two things before I do that:
1. If it's too close to the other hole.. it may make the metal weak
2. Make sure there's nothing important underneath

We looked at swaping out the bottom rails... i.e. Put the Civic ones on the Teg seats... but... I couldn't get some bolts out.. and didn't have any WD-40. So that could work. It looks like it does.... but.. I can't say for sure.