engine swap advice
It has a cable transaxle and older electronics. You either need a cable to hydro adapter and mount or a hydrolic transaxle, plus you need an OBD-1 distributor and fuel injectors amoung other things.
Given that info, $1600 isn't such a good deal.
Given that info, $1600 isn't such a good deal.
Going with the SiR II would be easier and it's rated 10hp more. That would probably be the wiser choice.
hmotorsonline has SiR-II swaps for $2350 with all the fixin's, you might want to make sure your guy provides all the stuff that Hmotors does.
hmotorsonline has SiR-II swaps for $2350 with all the fixin's, you might want to make sure your guy provides all the stuff that Hmotors does.
The swap comes with :
Motor
Transmission
Engine Wiring Harness
All required Cables
ECU
Distributor
Complete Intake Manifold
Alternator
A/C
Power Steering Pump
All Brackets and Sensors
Shiftlinkage ($75 extra)
2170 plus shipping
that price is his price...i'd get the whole sale on that. i checked out hmotors but the site was down so i'm not sure if they offer more then my guy.
Motor
Transmission
Engine Wiring Harness
All required Cables
ECU
Distributor
Complete Intake Manifold
Alternator
A/C
Power Steering Pump
All Brackets and Sensors
Shiftlinkage ($75 extra)
2170 plus shipping
that price is his price...i'd get the whole sale on that. i checked out hmotors but the site was down so i'm not sure if they offer more then my guy.
Originally posted by arctic_giraffe
ok...thanks everyone very much for the help. i'll deffenitly be doing the b16a swap then. i can get the whole swap with engine mounts for about $1600 then i finally just found a friend who is a mechanic and will do all my work for free. so i figured that's a good deal. again thanks. i'm sure i'll see everyone around here again soon.
arctic_giraffe
ok...thanks everyone very much for the help. i'll deffenitly be doing the b16a swap then. i can get the whole swap with engine mounts for about $1600 then i finally just found a friend who is a mechanic and will do all my work for free. so i figured that's a good deal. again thanks. i'm sure i'll see everyone around here again soon.
arctic_giraffe
i got the whole sale price because my friend (who drives an acura integra ls) is a really good web designer and made a deal with www.rimsandthings.com where he'd do their site if he could get whole sale prices. pretty cool deal actually...made me want to become a web designer but then i decided i didn't want to be a complete nerd.
From H motors
B16A 88-91 (SiR I) Motor, Tranny, Computer
Price: $ 1250.00 Plus shipping and handling.
Availability: In stock and ready to go
- Motor
- Cable Tranny (Y1, S1, J1)
- ECU (PR3, PW0)
- Alternator
- Starter
- Clutch
- Flywheel
- Intake Manifold
- Exhaust Manifold
- Fuel Rail
- Injectors
- Distributor
- Engine Harness
- Comes With All Sensors Needed
- LSD Tranny (Optional +$300)
Motors average 35,000 miles and come with a 100% start up warranty. All Sensors are guaranteed not broken and in working condition!
*Requires aftermarket parts for most applications. We can supply you with the hasport mount kit for $350 and the hasport linkage for $50. Prices only valid with purchase of a complete changeover. We can also supply you with 90-93 Integra steering knuckles and hubs for $50 if you need them. Also availabe is the Hasport Aluminum A/C bracket for $160 and the Hasport wiring sub-harness for EF civics that are either HF or Si models (not DX or STD) for $60.
Price: $ 1250.00 Plus shipping and handling.
Availability: In stock and ready to go
- Motor
- Cable Tranny (Y1, S1, J1)
- ECU (PR3, PW0)
- Alternator
- Starter
- Clutch
- Flywheel
- Intake Manifold
- Exhaust Manifold
- Fuel Rail
- Injectors
- Distributor
- Engine Harness
- Comes With All Sensors Needed
- LSD Tranny (Optional +$300)
Motors average 35,000 miles and come with a 100% start up warranty. All Sensors are guaranteed not broken and in working condition!
*Requires aftermarket parts for most applications. We can supply you with the hasport mount kit for $350 and the hasport linkage for $50. Prices only valid with purchase of a complete changeover. We can also supply you with 90-93 Integra steering knuckles and hubs for $50 if you need them. Also availabe is the Hasport Aluminum A/C bracket for $160 and the Hasport wiring sub-harness for EF civics that are either HF or Si models (not DX or STD) for $60.
Again from H motors. They are back up so go check em out they have real good prices.
B16A 92-95 (SiR-II) Motor, Tranny, ECU
Price: $ 1799.00 Plus shipping and handling
Availability: In stock and ready to go
- Motor
- Hydrolic Tranny (S21, Y21)
- ECU (P30)
- Alternator
- Starter
- Clutch
- Flywheel
- Intake Manifold
- Exhaust Manifold
- Fuel Rail
- Injectors
- Distributor
- Engine Harness
- Comes With All Sensors Needed
- LSD Tranny (Optional +$300)
Motors average 35,000 miles and come with a 100% start up warranty. All Sensors are guaranteed not broken and in working condition!
* Please Note: This is not a complete swap. It does not come with axles, shift linkage, or motor mounts
Price: $ 1799.00 Plus shipping and handling
Availability: In stock and ready to go
- Motor
- Hydrolic Tranny (S21, Y21)
- ECU (P30)
- Alternator
- Starter
- Clutch
- Flywheel
- Intake Manifold
- Exhaust Manifold
- Fuel Rail
- Injectors
- Distributor
- Engine Harness
- Comes With All Sensors Needed
- LSD Tranny (Optional +$300)
Motors average 35,000 miles and come with a 100% start up warranty. All Sensors are guaranteed not broken and in working condition!
* Please Note: This is not a complete swap. It does not come with axles, shift linkage, or motor mounts


