lowering
sancho on the sizzide!
Joined: Aug 2000
Posts: 27,129
Likes: 0
Originally posted by civicboi95
what is the toe again and how to adjust it?
what is the toe again and how to adjust it?
if you look at negative camber from ground angle... it would look like this / \
if you look at toe from above angle, toe in would look like this / \
the only way to adjust it is by getting an alignment
__________________
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
sancho on the sizzide!
Joined: Aug 2000
Posts: 27,129
Likes: 0
2.25 to 2.5 will give u a 2 finger gap... depending on which gen civic.
__________________
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
I'm RICK JAMES, bitch!
Joined: Mar 2002
Posts: 4,742
Likes: 0
From: Baltimore, Md
With less than 2'' you are not supposed to need a camber kit. I have Neuspeed Sports which is like 1.5-1.75'' drop or something and my camber is still pretty normal, a little bit doesn't hurt anyway.
Honorary Moderator Alumni
Joined: Sep 1999
Posts: 8,735
Likes: 0
From: Someplace with cones=AUTO
asiandood: a 2" drop will have 2 finger gap. A 2.25-2.5" drop will have no finger gap - unless you really have skinny fingers 
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
sancho on the sizzide!
Joined: Aug 2000
Posts: 27,129
Likes: 0
Originally posted by CivicSiRacer
asiandood: a 2" drop will have 2 finger gap. A 2.25-2.5" drop will have no finger gap - unless you really have skinny fingers
asiandood: a 2" drop will have 2 finger gap. A 2.25-2.5" drop will have no finger gap - unless you really have skinny fingers
you might be right
but i was reffering to 92-95's ...I think EK's sit lower than EG's to begin with. Not sure.
__________________
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
Thread
Thread Starter
Forum
Replies
Last Post