Im assuming you want me to take a video of some sort?

 

yeah basicly

 

Dope.

 

so i take it the basemap worked out well?

and whats the deal with your baby shitz break in.. go romp on that beast, rings will have seated within 20min & a couple warm-up's & cool downs!

 

agreed. Babying the motor to break it in = fail

 

I was going with the procedure that they told Josh(straitguitarist) when they put in his motor. The Basemap is working well except for the fact that after driving for a while when i come to a stop the motor dies, it fires back up, but if i dont catch it it will stall out. I have to chase a O2 sensor code also. Just the other day i got a code 1.


I was just looking at some gearing things for my trans its is interesting
Base transmission selected: 94-01 US B16A/ITR 1st gear 3.230 2nd gear 2.105 3rd gear 1.458 4th gear 1.107 5th gear 0.848 Final drive 4.400
Gear Shift RPM Speed @ 9000 RPM 1st N/A 44.1 2nd 5865 67.6 3rd 6234 97.7 4th 6833 128.6 5th 6894 167.9 RPM in top gear at 75 mph: 4020

 

What rpm is it idling at, might wanna raise it a tad so that it doesn't do that. (idle screw on tb)

 

I would do that, but my blox TB doest have an idle adjust on it

 

well that sux! I guess u'll just have to generate a controlled vacume leak somewhere else!

 

just gonna tell him to poke a pin hole in a vacuum line h: