NGK Iridium Spark Plugs

Reply Subscribe

Thread Tools

May 4, 2006 | 03:26 PM

#21

JDMPONY00

Senior Member

Joined: Nov 2005

Posts: 509

Likes: 0

Quote:

Originally Posted by Däs Schmoo

I have no idea. I would assume that the gap would be the same as my GSR at .044". If it says .052, do that. If you have misfiring problems, close the gaps down.

ya my my denso's are gapped to .044 so ill just look in my haynes book or somthing.

May 4, 2006 | 05:28 PM

#22

JDMPONY00

Senior Member

Joined: Nov 2005

Posts: 509

Likes: 0

in the haynes book it says to use NGK PFR6L-13 at a .047-.055 gap those are the NGK LAser platinums?

May 4, 2006 | 06:05 PM

#23

remy

Thread Starter

Senior Member

Joined: Jul 2005

Posts: 335

Likes: 0

From: New Jersey

Quote:

Originally Posted by Däs Schmoo

OEM is NGK. Stick with those.

I had Denso plugs. They sucked.

I had Iridium plugs. They sucked.

NGK makes both iridium, platinum, regular etc.... !

so hows NGK OEM???im kinda of confused

May 4, 2006 | 06:38 PM

#24

Wharbone

Senior Member

Joined: Apr 2003

Posts: 6,157

Likes: 0

From: Dallas, TX

Quote:

Originally Posted by remy

NGK makes both iridium, platinum, regular etc.... !

so hows NGK OEM???im kinda of confused

Just get the NGK OEM's (copper). They are dirt cheap and work great.

May 4, 2006 | 07:38 PM

#25

JDMPONY00

Senior Member

Joined: Nov 2005

Posts: 509

Likes: 0

Quote:

Originally Posted by Wharbone

Just get the NGK OEM's (copper). They are dirt cheap and work great.

The plugs they say that are oem for 99-00 civic si b16a2 motors in both my cars owner manual and my haynes book are the NGK PFR6L-13's which are NGK laser platinums. so im torn on what to do i think ill just get what the books recommend?

May 4, 2006 | 08:04 PM

#26

Provocateur

On permanent hiatus

Joined: Jul 2004

Posts: 9,716

Likes: 0

From: A forum with actual tech

Quote:

Originally Posted by remy

NGK makes both iridium, platinum, regular etc.... !

so hows NGK OEM???im kinda of confused

Iridium plugs don't come OEM.

May 7, 2006 | 06:08 AM

#27

remy

Thread Starter

Senior Member

Joined: Jul 2005

Posts: 335

Likes: 0

From: New Jersey

Quote:

Originally Posted by Wharbone

Just get the NGK OEM's (copper). They are dirt cheap and work great.

coool,thanks!!! ill be doing that then!!!

May 7, 2006 | 09:35 AM

#28

JDMPONY00

Senior Member

Joined: Nov 2005

Posts: 509

Likes: 0

Quote:

Originally Posted by remy

coool,thanks!!! ill be doing that then!!!

I just put the oem laser platinums in my b16 and its running great. They are more expensive but they will last longer than the coppers. But either way you can't go wrong coppers or the oem laser platinums. However, I was not pleased w/ my iridium plugs.