HElP!?!? NEW Clutch and pedal goes to floor.. help please..
sancho on the sizzide!
Joined: Aug 2000
Posts: 27,129
Likes: 0
Originally Posted by 95civicex4dr
my slave cylinder went 3 times and the last time i bought a bendix one and never had a problem with it, the one time it went was on the highway i had to slam the pedal as hard as i could and slam it in gear....yea so i would say its eather your slave cylinder or your hydraulic line has air in it. it is really easy to bleed.
it is recommended that you replace the master also if you replace the slave.
__________________
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
Registered User
Joined: Jun 2005
Posts: 505
Likes: 0
The clutch pedal is supposed to go to the floor. If it drops to the floor and wont come back up and the resevoir is full I'd say either there is air in the line, the bleeder screw is still open, there is a leak somewhere or the clutch release fork is not returning.