Brightstar HID H4 hi/lo kit
Still here... sorta...
Joined: Sep 2000
Posts: 17,177
Likes: 2
From: CO
Originally Posted by VtecRacer
I'm not sure about the laws in the states, but I'm from up here in Canada
and the kit that I found was considerably cheap, around 300 CAD.. so that's why I'm considering it
I don't want to do retrofitting, too much modifying and I'd like to sell the car sometime in the near future anyways.. so nothing too extreme.
Doesn't the glare depend on how u align the bulbs? if the bulbs are lower.. it won't blind everyone will it?
Thanks
and the kit that I found was considerably cheap, around 300 CAD.. so that's why I'm considering it
I don't want to do retrofitting, too much modifying and I'd like to sell the car sometime in the near future anyways.. so nothing too extreme.
Doesn't the glare depend on how u align the bulbs? if the bulbs are lower.. it won't blind everyone will it?
Thanks
Wanderer
Joined: Aug 2000
Posts: 10,793
Likes: 0
From: Not so Sunny Cali
Originally Posted by westcoaststyle
Not with HID's, I don't believe. You need to put a shield above the bulb to keep the light from shining too high and into oncoming traffic.
h:
Thread Starter
Senior Member
Joined: Aug 2002
Posts: 237
Likes: 0
From: Ontario
Could someone please explain what this Hi/Lo beam for the kit is?
I'm not entirely sure what it is, since all I've heard if that if you add HID's to a civic, you lose your High beams.
I also found this pic from 7thGencivic, a lowbeam for HID and highbeam as halogen?
http://www.7thgencivic.com/forums/sh...=168192&page=3
I'm not entirely sure what it is, since all I've heard if that if you add HID's to a civic, you lose your High beams.
I also found this pic from 7thGencivic, a lowbeam for HID and highbeam as halogen?
http://www.7thgencivic.com/forums/sh...=168192&page=3
for that added pep
Joined: Jun 2002
Posts: 1,203
Likes: 0
From: greensburg PA
yea i installed my hella HID's and lets just say they are up for sale ($250 shipped PM me if interested) 
yea they are bright as hell..... except in front of me
they did look good when my buddy had em in integra housings (the projector side) and looked good when i held em in the denji's, but with the JDM housings the beam pattern is everywhere. odd because when i was running halogens they had a better beam pattern than stock.
and for the record mine are wired to the high beams. if i wire em to the low beams i keep blowing fuses.
yea they are bright as hell..... except in front of me
they did look good when my buddy had em in integra housings (the projector side) and looked good when i held em in the denji's, but with the JDM housings the beam pattern is everywhere. odd because when i was running halogens they had a better beam pattern than stock.
and for the record mine are wired to the high beams. if i wire em to the low beams i keep blowing fuses.
Administrator ☂
Joined: Jul 2002
Posts: 56,734
Likes: 3
From: NY
Originally Posted by hybridhondahatch
and for the record mine are wired to the high beams. if i wire em to the low beams i keep blowing fuses.
__________________
9Y0 Cayenne GTS
E46 ///M3
YD4 MDX - SOLD
EG Ferio - SOLD
FA Ferio - Returned
www.NelsonLee.net
9Y0 Cayenne GTS
E46 ///M3
YD4 MDX - SOLD
EG Ferio - SOLD
FA Ferio - Returned
www.NelsonLee.net