honda 96 accord ignition pinout

Starter - black/white
Ignition 1- black/yellow
Ignition 2 - white/black
Accessory - Yellow
12volt Constant - White

if your car ignition turns on, but no crank, test ur starter wire (black/white). connect a voltmeter [digital] and test by connecting (-) to ground and positive (+) to start wire. when u hold the start, 12volts should be shown on your volt meter. if not, check your starter fuse in driver kick panel. If you wish to "hot wire your car" so u can use it temporarily, its actaully alot of work because u need to start, while cutting ignition then when u let go of start, the ignition comes back on to hold the car allowing it to run. if u want to use a switch to temporaily start ur car, PM me and ill whip up a diagram for ur car.