Originally Posted by
Däs Schmoo
No.
Torque them to 25 ft/lbs and then torque to 50 ft/lbs. One at a time, loosen 1/2 turn, then re-torque to 50 ft/lbs. Do this 3 times per stud and then do a final torque to 75 ft/lbs. Keep in mind, this is all done in the normal criss-cross fashion working your way out.
This is correct :thumbup:
don't forget to use your ARP lube on the threads of the studs b4 sticking them into the block. Torque the bastards to 25 / 50 / then 70 & call it a day!
