I meant wheel locks/keys. Fuck breaking studs, thats ghetto.

 

Where you located? I'm by Clifton

 

break all 16 studs? no way, that'll result in waaay too much work..

you'd either have to figure out how to press out the old studs and press in new ones, without removing the hubs entirely that is. or you'd have to replace all the hubs, and the front ones would need to be pressed out.

way too much work and $$$ for the problem being addressed..

 

PM'd

 

ok, i see what you're saying now. duh. :doh:

make sure he has 16 regular lugs handy if he's heading over for you to do that.

 

i know , i just stole your quote for my purposes

been there done it... sometimes its the only way :shrug:

studs are easy to do most the time.... punch and hammer to get them off the hub, then to put them back on just knock em in with a hammer....impact to the nuts will suck em up the rest of the way...

cheap and not the right way but it does the trick

 

drive it over to snoopy's house and leave it over night. Problem solved.

edit: except you're one of the few people who doesn't live in socal.

 

Yeaaaaa, I know. East coast guy here BUT...........if I was there I might as well leave my keys in the ignition, car running and doors unlocked. :chuckles:

 

I leave my cars running unattended all the time in NH :chuckles:

I wouldn't do that in Mass :ugh:

 

:ts:

Even here I bolt up just to walk into a corner grocery store. h: