in your area...
Thread Starter
DAMIMRED
Joined: May 2002
Posts: 13,495
Likes: 0
From: Syracuse, NY
Originally Posted by swaggs21
that is weak....
if it cant house a tractor, it is not a good tool shed
h:
if it cant house a tractor, it is not a good tool shed
h:not a big quad tractor but look at the right side of the "shed" there is a garage. you could hold a modest tractor in there. :yes:
Joined: Dec 2002
Posts: 5,747
Likes: 0
From: Lumberport, WV
Originally Posted by ISP James
not a big quad tractor but look at the right side of the "shed" there is a garage. you could hold a modest tractor in there. :yes:
I woulnt even hold a landscaping tractor :wtc:
But anything smaller than that it would be a fine shed :fawk:
A tractor with a cab would stand taller than that shed
h:
Thread Starter
DAMIMRED
Joined: May 2002
Posts: 13,495
Likes: 0
From: Syracuse, NY
bah this would clear a standard garage door:
http://www.newholland.com/h4/product...s=000005149711
if not, just drive that motherfucker right through it
http://www.newholland.com/h4/product...s=000005149711
if not, just drive that motherfucker right through it
Joined: Dec 2002
Posts: 5,747
Likes: 0
From: Lumberport, WV
Originally Posted by ISP James
bah this would clear a standard garage door:
http://www.newholland.com/h4/product...s=000005149711
if not, just drive that motherfucker right through it
http://www.newholland.com/h4/product...s=000005149711
if not, just drive that motherfucker right through it
No sir, not even close, the rollbar (even though it folds down) will still hit, and the person driving it would be cramped to get down far enough to get under the door.
I wish I had a pic of our "shed"
Thread Starter
DAMIMRED
Joined: May 2002
Posts: 13,495
Likes: 0
From: Syracuse, NY
Originally Posted by swaggs21
No sir, not even close, the rollbar (even though it folds down) will still hit, and the person driving it would be cramped to get down far enough to get under the door.
I wish I had a pic of our "shed"
I wish I had a pic of our "shed"
i dont know about your garage door but mine has 8' clearance. that tractor with the bar down does not exceed 8'
in the picture, the garage door looks standard to me :dunno:
Joined: Dec 2002
Posts: 5,747
Likes: 0
From: Lumberport, WV
Well that looks like the TC55DA, and its height to the top of the folded down rollbar is 91", and you sit up higher than that, so the operator would have to duck a lot 
It would look like you were driving a lowrider through east LAh:
It would look like you were driving a lowrider through east LA
h:
Thread Starter
DAMIMRED
Joined: May 2002
Posts: 13,495
Likes: 0
From: Syracuse, NY
Originally Posted by swaggs21
Well that looks like the TC55DA, and its height to the top of the folded down rollbar is 91", and you sit up higher than that, so the operator would have to duck a lot
but it would still fit